• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Broke SATA power plug: advice?

M

Mnx4

[H]ard|Gawd
Joined
Jul 29, 2005
Messages
1,039
So I got a new hard drive today and while installing it, I managed to break the old drive that I was replacing:

ie06xw.jpg


The part that the power prongs lie on snapped off due to a cable that got stuck (I honestly thought the horrid sound was the cable wrapping that was rubbing against the case:(). It still works, though the power plug barely hangs on. I managed to quickly clone the drive to the new one, so I'm good there.

Would you guys recommend fixing that? If so, will a dab of glue/epoxy/superglue work? Or just count my blessings I got my data off and toss it?

Cheers,
Mnx4
 
I did the same thing to one of my drives. just glued it back on and ziptied the power cord to the hard drive rack so it would stay in place. Drives been working for 2 years since the incident.
 
B-Sal said:
I did the same thing to one of my drives. just glued it back on and ziptied the power cord to the hard drive rack so it would stay in place. Drives been working for 2 years since the incident.
Click to expand...
I would probably do that but zip tie a power adapter or power extension cable there instead and that way you could still unplug the drive (leaving the cable still attached) without having to undo zip ties.
 
not sure how yours broke, but his already looks like a ground short ready to happen. That can't be a good thing for a psu.
 
Thanks for the advice. I've got a spare adapter lying around somewhere. Gonna have to use one anyway, seeing as it messed up two of my SATA power plugs as well...

As far as glue goes, any recommendations? I've got superglue but I know that doesn't mix well with some plastics.
 
You must log in or register to reply here.
Back
Top