Biostar 785G memory issue

kirbyrj

Fully [H]
2FA
Joined
Feb 1, 2005
Messages
31,350
I bought this board:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813138156

with this memory:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145247

Now when I try to run both sticks, it won't post. The computer turns on, the fans run, but nothing on the screen. When I run one stick in the bottom slot, it runs fine. It will turn on and run with both sticks individually in the bottom slot. If I run either stick in just the top slot, neither one will post. No amount of bios tinkering will solve the problem. I tried adding voltage and manually entering the speed I want the memory to run at, but no go. So I figured it was a bad memory slot.

However, I have an old set of 2x256mb DDR2 memory sitting around, and I decided to give it a try running with the 2x256. And what do you know, both sticks work fine. So what do you think the problem is? I can get both slots to work with some memory, but not with other memory.

I also tried running this memory out of my own computer:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231166

I get the same issue as with my Corsair memory.

Any ideas?
 
Yes, I grabbed the latest bios which was dated 9/11/2009. The shipped bios was dated 9/4/2009 and recognized the Athlon II 620 quad core without issue.
 
Run it @ 800mhz. I got the same board (and Processor) for my mom and during OS installation it would bluescreen whenever I would run at 1066. (We were using the same G. Skill ram as you have).

Edit: If trying 1066, ensure you have Bios voltage raised to 2.1~2.2v
 
I tried it at 1066@2.15V, and I tried it at 800mhz@2.15V and both a default (on this board 1.95V). I also tried at 667mhz just for good measure, but no dice.
 
You trying to boot with onboard video? I couldn't get onboard video to work, but thankfully it was fine running through the HD 5770.
 
You trying to boot with onboard video? I couldn't get onboard video to work, but thankfully it was fine running through the HD 5770.

I tried both with the onboard video and also with an addon PCIe 3650 I had lying around just to see if it was the onboard video.

Basically when it had both slots full, it wouldn't pass a POST memory test I would imagine. It doesn't have a readout, so I can't tell exactly what it's doing, but the fans would spin up, and then spin faster when it went it actually POSTed. It would only spin at the slower rate when the memory was in both slots.

I ended up RMAing the board and got a new one. It kind of sucks for Newegg since I got a brand new processor, but they are making me return that with the board since I got it with a combo, even though the CPU seems to work perfectly. Probably end up as someone's "Open Box" processor.
 
Back
Top