bios flash tyan s7010

jetfire

Limp Gawd
Joined
Dec 16, 2010
Messages
221
hi

never done this b4 and a bit confused as what i need to do have downloaded the latest bios but unsure how i do this on this motherboard.

thanks
for any help
 
DSC_0132.JPG

The Motherboard BIOS must be able to boot to a USB bootable device. Not all core bios versions have USB as a bootable option. Double check your documentation if you are unsure if this option is supported.

  1. Make the USB Flash key bootable. Insure that you have the command.com, IO.sys and MSDOS.sys files on the USB key so that it will be bootable.
  2. Place the unzipped batch files (batch file, flash utility, bios file and .txt file) on the USB key.
  3. Make sure that the USB Flash Key is at the top of the boot order in your bios so that when the motherboard is turned on it will immediately boot to the USB Flash Key and boot cleanly to an A: prompt.
  4. Simply type in flash at the A: prompt and the rest will be handled by the batch file itself.
  5. Clear the CMOS. Reboot system and the flashed version of the BIOS should now be present on your monitor.

thats the unzipped file what do i need to put on the usb drive to flash it ?
 
so do i just need to copy the rom file to the usb stick then boot from this and type flash to update the bios ?

the ver of the bios i have dont support the 6 core cpus i have so i need to update it or it wont post with these installed.
 
Please do the following:

1. Please extract all the four files you have downloaded from S7010 BIOS websites to your USB flash drive

2. Boot into USB flash drive

3. Go to folder where you have put the four files for S7010

4. Issue flash.bat to update the BIOS.

got it sorted now ;)
 
or not lol, so i made a boot usb drive with rufus and copied the bios files to it ok and not a problem i plug it in and reboot to bios and nothing is there bar the usb dvd drive and usb is set to first boot order.

i tried the usb stick in the mobo usb socket direct and unplugged the dvd drive and still nothing in bios but it does beep if i pull it out and remove it but it is not showing as a bootable device.

i used a sandisc usb 3 drive could this be the problem ? and this thing gets HOT!
 
fkn thing would only see a usb 2.0 stick to update the bios in the type a on the mobo, pita!

DSC_0135.JPG
DSC_0135.JPG
 
Back
Top