Bios can't get past processor, what's going on?

Joined
Dec 25, 2006
Messages
3
Hello everyone, I just got a slew of brand new computer parts for Christmas but they're giving me some trouble. Building the PC gave me no problems until I went to turn the thing on.

The first Bios screen showing my GPU flashes no problem. The second Bios screen begins going through my hardware, but it stops after it displays my processor. I can't tell if it's frozen or not because the keyboard I have plugged into the system doesn't seem to work (the lights aren't on)

I was wondering if this is possibly a problem with my memory. (since that is the next thing Bios should display) I have heard that the memory I purchased refuses to run at anything but 1.8v, but what do I do since I can't get into the Bios options to change that?

Anyone ever have this problem? Or can anyone give me some troubleshooting steps I can go through to pinpoint (or fix) what's causing the problem?

Here are the parts involved:
Intel core 2 duo E6300
ECS P965T-A motherboard
2x 1 gig G-Skill DDR2 800 dual channel memory

I doubt these parts would have any effect on a problem like this, but here they are anyway:
NZXT Lexa case
XFX Geforce 7800gt
Seagate 350gb hard drive
Thermaltake 430w power supply
 
No, there are no beeps. The computer begins to go through the Bios correctly. As far as having everything installed correctly, I'll begin to double check myself, but it seems like the computer would either fail to boot entirely or crash at some point if hardware was improperly installed, not just make it halfway through Bios and.. well.. stop.
 
You need to post a list of the parts so people can help you.
 
You could try each stick of RAM, one at a time. Do you have another computer or any other parts so that you could try swapping parts out?
 
I have lots of other computer parts and sticks of memory, unfortunately, none are DDR2 so I can't switch them out.

Upon inspection of my motherboard and case, I noticed that there is no internal speaker anywhere, so even if my PC is sending out a beep code, which it very well may be, I can't hear it. I have a small internal speaker from another motherboard that has four pin sockets in the back of it, but when I tried plugging into the internal speaker pins on my motherboard, it doesn't beep at all.

I am really starting to think this is a result of my motherboard running my memory at an incompatible voltage, but without another stick of DDR2, It doesn't seem like I can get into the Bios to change the voltage settings.
 
Back
Top