Asus Tech Support... A rant...

operaman

[H]ard|Gawd
Joined
Feb 16, 2004
Messages
1,180
UPDATE and rant:

These bastards at Asus now say that the agp/pci locks are not their problem on the A8V. They said that they do not support overclocking features. When I told them that they advertised the board as such, they basically said well send it in and we will look at it. I sent in in and we will see.

You know, this is sad. You try to be honest and not bork a board and try to get what they advertise, and they deny you. So to all the people who totally destroy their components overclocking and then send them back, good for you. I honestly wish I had lied now and told them my board didn't post. It beats what is most likely the altenrative. Getting a board that does not work as advertised and basically told to sit on it...
 
I've owned 3 ASUS boards from a 400mhz cele to their top of the line with a 2.66 HT and they all have been junk.

first board fried after 2 years, no OC'ing, nothing.. just big case and usual fans. the same thing happened with the 1ghz cele board but it was under the 90 days return.

It went with a el'cheapo AMD Nforce 2 with a 2400 XP chip for a while.. no problems. Been using a Shuttle I got for $38 from newegg Overclocks wonderful.

Well, I built a computer for a friend and he wanted a Asus P4C800-E DELUXE because of all the bells and whistles and the price means quality in his mind, The documentation is horrible! SATA RAID, RAID, ide 0 1 floppy, legacy support for ports.. @.@ :rolleyes:

Got the board from Newegg.. DOA, sent it back and it worked for 5 months then it just spent out CPU ERROR cords or something every cold boot then it just stopped booting.

I got in touch with ASUS by phone after 5 minutes which isn't bad. I explain the situation situation and that I need an RMA and I get about 10 questions about things to "check" which was a slick test to see if you had done something the mobo.

In the end 20 minutes later I had a RMA and off it went. FOUR weeks later I get the "new" board. DOA!!! It had obviosly has a burned socket issue so I take a picture and call back pissed. You can guess what I get, "Sir, we do not warrenty damaged caused by the end user."

After getting to his boss and expaining and sending pictures of 50+ computers I've put together and that I signed for the mobo at 4:32pm and called at 4:45pm (uhh I'm not THAT good) I got a RMA number.

Sent it back, now my freind who wanted someone to help him build his crappy system is getting all pissy so Iafter 2 weeks I get another board.

It worked, but overclocking even a little and POOF!

I gave the puter to the firend and the ASUS number and I've washed my hands of ASUS now.. NEVER again.


ASUS is on my sh1t list.
 
Damn
u have had really bad luck with Asus


Mine is totally opposite. Had 2 Abits, both just go bad, replaced with Asus', still going strong today. This was over 4yrs ago.

I then went to a MSI board, hated it with a passion, and now back to Asus in my home setup. Been up for 4months, perfect.. LOVE the board. Just built a AMD64 with a Asus @ work, and it's been nothing but perfect so far too.

Not mentioning boards I have used for others & frieneds....

Asus is all I buy basically.
 
i'm with ezekial, my friends and i combined have used more than 20 asus boards in the past 8 years and the only one that died was my old a7v133.... i unplugged a floppy drive cable from it while it was on and it never booted again ;) (read: my own stupidity :D)
 
Wow, I am just pissed abbout agp/pci locks. That sucks man... :( Their tech support is seriously lacking, but what do we expect?? My prob is they ADVERTISE and sell to enthusiasts amd then tell us to f*** ourselves when it doesn't do what they ADVERTISED to us to get us to buy it in the first place. Then they release a Version 2??? Version 2??? and say IT WORKS NOW?? That is b.s. So there you have it...
 
They may advertise it but as with all things relating to OC'ing, whether it works or not is really not their responsibility. The locks aren't needed to run the board at stock speeds with any processors so they obviously wash their hands when they don't work.

There's been entire series of mobos from numerous manufacturers that advertised working locks and later didn't have them (like every early A64 board for instance). Should've searched the boards some, even the Anand review says you need Rev 2 to get reliable locks (though I hear some of the Rev 1.x's work with a BIOS update).

When I buy a made PC from a manufacturer I don't spend a month scurrying the web for reviews and message board comments, but when I'm building it myself you bet your ass I do all the proper research. After all, I'm my own tech support in most cases and I'm not paying anyone to build it for me and test compatibility. Nothing is guaranteed when you're putting a dozen parts together from scratch, ever.

No matter how much the industry has improved in that respect (and it has, by leaps and bounds), I never expect to find no issues whatsoever, the pure logistics of it demand that there will always be some.
 
headless said:
i'm with ezekial, my friends and i combined have used more than 20 asus boards in the past 8 years and the only one that died was my old a7v133.... i unplugged a floppy drive cable from it while it was on and it never booted again ;) (read: my own stupidity :D)

I have a similar story with an A7V133 that "burned up".

The CPU in the thing fried but there was no real reason why. There weren't any burn marks on the board or anything so I sent that back and had it checked out because the secondary IDE controller became flaky after I put a new CPU into it. Well...the board came back, they said there was nothing wrong with it and to this day it's still running that replacement AXP1600+ as a server with Linux on it. :D

Abit has been dissapointing to me over the last four years and my first run with MSI has been a very mixed bag.
 
I've built 12/13 (I should know, it's in my records) computers with different versions of the A7N8X boards, never had a problem with any of them, they've all been up and running for over a year.

However, an aquaintance of mine builds all the intel comps used by his company (they have full time tech support on staff, so why buy pre-built). He always uses ASUS boards. He finds them very reliable. But, when they die, as long as they don't arrive dead, he just throws them away, because their Tech Support is usually so bad. If you really got them on the phone not once, but twice, I'll have to tell him they actually hired a tech.
 
Asus' biggest market is still by far the corporate OEM's. It may look like they market to enthusiasts, but they don't really care to help you when you OC against all their warnings. You have a MB manufacturer that does?

Not trashing Asus: I have loved every board and other component I bought, the most stable, durable components ever. I will pay the extra $10 for asus, and their tech support, though slow as shit, will try to help you out if you are honest and polite.

[Edit:] Sorry you have had a bad experience, operaman. I just wanted to flip the other side of the coin.
 
tcraig_4096 said:
Asus' biggest market is still by far the corporate OEM's. It may look like they market to enthusiasts, but they don't really care to help you when you OC against all their warnings. You have a MB manufacturer that does?

Not trashing Asus: I have loved every board and other component I bought, the most stable, durable components ever. I will pay the extra $10 for asus, and their tech support, though slow as shit, will try to help you out if you are honest and polite.

[Edit:] Sorry you have had a bad experience, operaman. I just wanted to flip the other side of the coin.

I don't really agree with you. My friend who builds the computers for his company, does NOT overclock, and he still can't get service that is worth shit.
 
I was referring to the advertising and marketing more so than the tech support. Yes it sucks (in mostly a slow, worthless way).

Sorry for the misdirection.
 
tcraig_4096 said:
I was referring to the advertising and marketing more so than the tech support. Yes it sucks (in mostly a slow, worthless way).

Sorry for the misdirection.
NP
yeah, it's gay how that advertise but not support it.. but I already know it's not guranteed. Its all marketing. If it gets more sales, that's all they care about really.

Asus is a big OEM manufacturer, as stated, and an enthusiasts market second. I do a lot of research before making a purchase and have been throughly pleased with the 3 Asus boards I have running. One is a CUSL2C with a P3 running 155fsb for about 4yrs now. It's the most stable machine I have ever had, just simply amazing. My new P4 is coming in close now, but is still not quite as reliable.. but I have not a single complaint thus far.
 
I'm not an overclocker, but I have build computers with ASUS motherboards (The One I'm typing on now is a P4P800 Deluxe and is OK) and Intel Motherboards (My latest build is an Intel D865GLC). Any more future builds will be Intel Motherboards, for they are very very stable and I don't get the flakiness with Intel as I do with ASUS motherboards. While I don't personally can't say anything really bad about ASUS, I'll take the dependability of Intel over ASUS anyday of the week. just my .02 cnets.
 
Back
Top