I have 4x2GB Patrior Sector 5 DDR3 @ 1333Mhz RAM sticks. In my Core 2 Quad Q9300 + Gigabyte mobo configuration, it showed up perfectly fine as 8GB @ 1333Mhz.
On my new Asus P8P67-PRO board however, it's only showin up as 4GB total. I ran CPU-Z on it and all 4 RAM slots show filled properly under the SPD tab, but under the Memory tab, the DRAM frequency only shows 668.9Mhz.
Any ideas what's going on here? I didn't see anything obvious in the UEFI config that would cause a problem.
On my new Asus P8P67-PRO board however, it's only showin up as 4GB total. I ran CPU-Z on it and all 4 RAM slots show filled properly under the SPD tab, but under the Memory tab, the DRAM frequency only shows 668.9Mhz.
Any ideas what's going on here? I didn't see anything obvious in the UEFI config that would cause a problem.