ASUS P5N-E SLI doesn't support SSDs?

rottweiler

[H]ard|Gawd
Joined
May 13, 2000
Messages
1,126
So I did a bit of research and it seems like many other people have experienced the same thing. Does the ASUS P5N-E SLI really not support an SSD? Specifically an OCZ 120GB Vertex 2. I did a fresh install of Windows 7 on my Wife's PC and it seemed fine. Even after the install, with the DVD still in the drive it booted into Windows and I ran Windows update. After the update restart I got a Please insert bootable disk error. I tried a few things, although not a new bios, including inserting the DVD again, but now it boots right away without the press any key to boot from CD message.

I assumed since I can see the drive in the bios, post, and windows setup installed just fine on it then it shouldn't be a mobo issue, but I can't find any other issue and the comments I found seem to indicate it is the mobo.

If a new bios or anything can fix this, please let me know. If not, well I was planning on upgrading her system soon anyway, just not this soon.

Thanks.
 
Well, maybe I'm crazy. I just set the old OS drive (XP) to boot and it booted into Win7. I think I verified that Win7 is installed on the SSD as it has a windows folder and SysWOW64. This was a brand new drive that I formatted before the install. I looked in Disk Management and the SSD is listed as (Boot, Page File, Crash Dump, Primary Partition) and the old OS is listed as (System, Active, Primary Partition).

Was this just a bad OS install? I definately selected the SSD for the OS drive during setup. This is a Home Upgrade version of Win7 if that matters, but I did this on 2 other PCs without any issue. One with an almost identical setup of a new SSD and original OS drive, though that one was Vista, and another with only the single OS drive that I formatted during the Win7 install.

I guess this is no longer a Mobo issue but any help is appreciated. I plan on removing the old OS drive at some point so leaving it in to boot isn't an option.

Thanks
 
When installing W7 is always best to either disconnect all other drives or make sure the SSD is on Port 0.

Otherwise you may run into the problem of the W7 boot sector not being on the W7 drive. ;)
 
It sounds like what happened is the windows 7 install saw the "XP drive" as the primary drive and put the boot files there. Where the boot files are located and where the OS is installed need not be the same drive. Unfortunately I don't think windows setup has any way to explicitly tell it what is the boot drive.

As old hippie says since you've only just installed easiest thing to do is to put the drive you plan to install windows on on port 0 and reinstall.
 
Yeah, not a big deal I can easily reinstall and unplug the other drives. I hope that's all but I don't know why I found other people that said the mobo can't support SSDs. Specifically because it doesn't have AHCI support. Did older SSDs require that and newer ones don't?
 
Back
Top