Figured I'd give the forum a shot.
I own a 1231ML 256MB, with BBU. My expansion times are very slow.
I've expanded several times, my latest expansion is from 6 disks to 7 disks. Hitachi 2TB drives. As I recall, it progresses roughly .1% every 4-6 minutes, or 1% every 40-60 minutes. Starts out at on the 4 end though towards the end of migration it ends up on the 6 end. They've always been this slow, with and without the BBU. Always 1% every 40+ mins.
The HTTP logins and restarts are simply me changing the settings, bulk of the time the settings were:
Changing the Disk Write Cache Mode to Enabled and Disabled has no effect on migration speed.
Here's a read test with Everest:
I've contacted Tekram, and the expected migration time was about 10-12 hours for 1TB disks. The last suggestion was that maybe the card is bad. RMA would be a hassle as I'll have to go without access to my data (the time to ship/test/receive).
Any ideas?
I own a 1231ML 256MB, with BBU. My expansion times are very slow.
I've expanded several times, my latest expansion is from 6 disks to 7 disks. Hitachi 2TB drives. As I recall, it progresses roughly .1% every 4-6 minutes, or 1% every 40-60 minutes. Starts out at on the 4 end though towards the end of migration it ends up on the 6 end. They've always been this slow, with and without the BBU. Always 1% every 40+ mins.
Code:
2010-05-24 06:27:32 Storage Complete Init 007:25:05
2010-05-23 23:06:14 192.168.001.003 HTTP Log In
2010-05-23 23:02:26 Storage Start Initialize
2010-05-23 23:01:32 000:0003ED1C2F00 Restart Init LBA Point
2010-05-23 23:01:31 H/W Monitor Raid Powered On
2010-05-23 18:48:34 Storage Start Initialize
2010-05-23 18:48:32 Storage Modify Volume
2010-05-23 18:34:59 ARC-1231-VOL#00 Complete Migrate 002:54:04
2010-05-23 16:02:02 192.168.001.003 HTTP Log In
2010-05-23 15:41:20 192.168.001.003 HTTP Log In
2010-05-23 15:40:56 ARC-1231-VOL#00 Start Migrating
2010-05-23 15:40:36 H/W Monitor Raid Powered On
2010-05-23 15:39:42 ARC-1231-VOL#00 Stop Migration 000:12:17
2010-05-23 15:27:50 192.168.001.003 HTTP Log In
2010-05-23 15:27:26 ARC-1231-VOL#00 Start Migrating
2010-05-23 15:27:06 H/W Monitor Raid Powered On
2010-05-23 15:24:28 ARC-1231-VOL#00 Stop Migration 000:25:56
2010-05-23 14:58:56 192.168.001.003 HTTP Log In
2010-05-23 14:58:33 ARC-1231-VOL#00 Start Migrating
2010-05-23 14:58:12 H/W Monitor Raid Powered On
2010-05-23 14:39:56 ARC-1231-VOL#00 Stop Migration 023:33:50
2010-05-22 15:37:10 192.168.001.003 HTTP Log In
2010-05-22 15:06:00 ARC-1231-VOL#00 Start Migrating
2010-05-22 15:05:45 H/W Monitor Raid Powered On
2010-05-22 15:02:22 ARC-1231-VOL#00 Stop Migration 017:18:56
2010-05-21 23:07:55 192.168.001.003 HTTP Log In
2010-05-21 21:44:03 192.168.001.003 HTTP Log In
2010-05-21 21:43:27 ARC-1231-VOL#00 Start Migrating
2010-05-21 21:43:10 H/W Monitor Raid Powered On
2010-05-21 21:42:22 ARC-1231-VOL#00 Stop Migration 000:01:53
2010-05-21 21:40:37 RS232 Terminal VT100 Log In
2010-05-21 21:40:29 ARC-1231-VOL#00 Start Migrating
2010-05-21 21:40:20 H/W Monitor Raid Powered On
2010-05-21 21:34:02 ARC-1231-VOL#00 Stop Migration 022:44:38
2010-05-20 22:49:36 192.168.001.003 HTTP Log In
2010-05-20 22:49:23 ARC-1231-VOL#00 Start Migrating
2010-05-20 22:49:19 H/W Monitor Raid Powered On
2010-05-20 22:36:00 ARC-1231-VOL#00 Stop Migration 000:53:43
2010-05-20 21:42:16 ARC-1231-VOL#00 Start Migrating
2010-05-20 21:42:14 Raid Set # 00 Expand RaidSet
2010-05-20 21:39:53 192.168.001.003 HTTP Log In
2010-05-20 21:38:59 H/W Monitor Raid Powered On
2010-05-20 20:46:02 192.168.001.003 HTTP Log In
2010-05-19 08:39:57 H/W Monitor Raid Powered On
2010-05-19 08:37:40 H/W Monitor Power On With Battery Backup
The HTTP logins and restarts are simply me changing the settings, bulk of the time the settings were:
Code:
Background Task Priority -------------- High (80%)
JBOD/RAID Configuration -------------- RAID
Max SATA Mode Supported ------------ SATA300
HDD Read Ahead Cache ------------- Enabled
Volume Data Read Ahead ------------- Normal
Empty HDD Slot LED ------------- ON
HDD SMART Status Polling ------------ Enabled
Auto Activate Incomplete Raid --------- Disabled
Disk Write Cache Mode --------------- Enabled
Disk Capacity Truncation Mode ------- No Truncation
Changing the Disk Write Cache Mode to Enabled and Disabled has no effect on migration speed.
Here's a read test with Everest:
I've contacted Tekram, and the expected migration time was about 10-12 hours for 1TB disks. The last suggestion was that maybe the card is bad. RMA would be a hassle as I'll have to go without access to my data (the time to ship/test/receive).
Any ideas?