another new build review

Joined
Sep 4, 2002
Messages
52
Like so many before me I haven't built a system for more than a few years and am hesitant to press the pay button on my orders. I've spent the past week or so here reviewing systems , posts and links and I think I've got everything covered. However, it's a lot of information to process and I'm hoping some patient people here, in between reviewing other systems, will review mine and interject if needed.

I'll be using the system for typical home office stuff as well as heavy gaming, quite a bit of 3D rendering (home architect software) and possibly some video editing down the road. I currently have a 22" LCD, but I'm planning on SLI so I can purchase a bigger, second monitor later. I do plan on overclocking as much as the air flow will allow me.

Here's the specs with questions comments following ...

Silverstone TJ09 case
Abit Ip35 pro motherboard
Q6600 Kentsfield 2.4GHz
Tuniq Tower heat sink
G. Skill 2 x 1GB DDR2 (model F2-6400CL5D-2GBNQ)
EVGA 880GTS 640MB
WD Caviar 250GB SATA HDD's
Asus 18x SATA DVD burner (DRW-1814BLT)
Corsair 620HX

I know the TJ09 case is huge and I read the thread about it, but I can't remember if I need any other extension cables besides a 12" 24 pin. I'm planning on purchasing 36" SATA cables along with new fans for the case (and I have the directions for changing out the front fan).

I'm planning on sticking with WinXP for a while and was wondering what gains, if any, would I see with 4GB of ram instead of 2GB. As I understand it I don't need "better" over-clockable ram with the Q6600. Is that correct?

My current system is causing me a lot of grief now and I'd like to build soon. I realize better technology is right around the corner, but I'm hoping there's enough expansion room in this system to keep me playing games happily for a while.

Thank you for your time and consideration.
 
Hey.

That's a pretty similar build to mine.

In any case, I have the:

Silverstone TJ09-BW
Abit Ip35 pro motherboard
Q6600 Kentsfield 2.4GHz
Tuniq Tower heat sink [LED Version]
G. Skill 2 x 1GB DDR2 (model F2-6400CL5D-2GBNQ) [Firestix PC2-6400 D9]
EVGA 880GTS 640MB [Holding out for nvidia G92]
WD Caviar 250GB SATA HDD's [WD3200AAKS as main, WD5000AAKS as extra storage]
Asus 18x SATA DVD burner (DRW-1814BLT) [Samsung drive]
Corsair 620HX


Freaking amazing build and never regret doing it as the performance gains were incredible. When overclocked, it blazes through applications.

Also about the 12" 24 pin, the stock 620hx cable can reach it the mobo fine.

Yes, DDR2-800 will be sufficient for the build as most people shoot for 3.2 - 3.6 Ghz.

If you plan on doing 4GB, get a 2x2GB kit. If your budget holds for only 2GB, get a good set of 2x1GB d9 micron kits. Running Vista x64, I am still doing fine with 2GB of ram.. and only will upgrade sometime later.. Also keep in mind, you may want a 64-bit OS for 4GB memory kits.

For the SATA cables, 24" to 36" should be fine. I have a 24", and it can reach the bottom bays pretty easily as well as the top 5.25" bay. 36" is rather long.

What kind of monitor do you think you want to get later?

Also are you sure you want to do SLI later?
 
Like so many before me I haven't built a system for more than a few years and am hesitant to press the pay button on my orders. I've spent the past week or so here reviewing systems , posts and links and I think I've got everything covered. However, it's a lot of information to process and I'm hoping some patient people here, in between reviewing other systems, will review mine and interject if needed.

I'll be using the system for typical home office stuff as well as heavy gaming, quite a bit of 3D rendering (home architect software) and possibly some video editing down the road. I currently have a 22" LCD, but I'm planning on SLI so I can purchase a bigger, second monitor later. I do plan on overclocking as much as the air flow will allow me.

Here's the specs with questions comments following ...

Silverstone TJ09 case
Abit Ip35 pro motherboard
Q6600 Kentsfield 2.4GHz
Tuniq Tower heat sink
G. Skill 2 x 1GB DDR2 (model F2-6400CL5D-2GBNQ)
EVGA 880GTS 640MB
WD Caviar 250GB SATA HDD's
Asus 18x SATA DVD burner (DRW-1814BLT)
Corsair 620HX

I know the TJ09 case is huge and I read the thread about it, but I can't remember if I need any other extension cables besides a 12" 24 pin. I'm planning on purchasing 36" SATA cables along with new fans for the case (and I have the directions for changing out the front fan).

I'm planning on sticking with WinXP for a while and was wondering what gains, if any, would I see with 4GB of ram instead of 2GB. As I understand it I don't need "better" over-clockable ram with the Q6600. Is that correct?

My current system is causing me a lot of grief now and I'd like to build soon. I realize better technology is right around the corner, but I'm hoping there's enough expansion room in this system to keep me playing games happily for a while.

Thank you for your time and consideration.

Your system looks good to me.

Well first of all, you will need a 64bit OS in order to take advantage of 4GB of RAM. XP 64bit is actually less supported in terms of drivers and software than Vista64bit, or so I'm told.

And yes you do not need better overclockable RAM with the Q6600.

Anyway good job. You did your research well. But FYI, no P35 motherboard supports SLI.
 
Good build, but to echo Danny. Stay with the BNQ's for your memory. You don't need Firestix, Ballistix, HZ's or any other Micron based sticks to OC a Q6600.
 
Thank you for your very quick, informative replies.

It would appear I need to do more reading about SLI. I was under the impression that if a board had two PCI-E X16 slots it could do SLI.

I have no idea what I'm going to get for a second monitor as it will be the middle of next year before she "lets" me buy anything else big for the computer, but I do know it's going to be quite a bit larger than 22". It looks like while I'm reading up on SLI, I need to revisit the GTS / GTX debates.

It sounds like 2GB of RAM will suffice for now.

Thanks again.
 
Looks good to me.

If you plan on going SLI later for a 24", 27", or 30" monitor (anything thats 1920x1200 or higher), pickup the 680i SLI A1 eVGA board and a QUAD 750W PC P&C PSU instead.
 
Back
Top