• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Another high temps thread

A

AzmoDeus

n00b
Joined
Feb 10, 2004
Messages
62
i have a 2.4@2.7 (non HT) with stock voltages in IT7 max2 rev 2
(can't remember what thermal compound i have put)
i have the stock cooler
2 fans in front (in)
2 fans at the back(out)

the temps that i am getting from speedfan seem to be a bit high
while running folding i have 58
without folding i have 45-46

is it a problem with the abit sensors?
or is it something else?

i am not encoutering any problems at all so far but during summer i will be in a lot hotter place than the one i am now

any suggestions?

any help appreciated
8o)
 
I had the original IT7 Max and found that the temperature probe on the cpu was about 6 degrees off (high). Those temps then are a little high, at load but not devastating.
 
I've found that Abit boards run closer to ten degrees too high. But like Bomber says could be as little as six degrees off.
 
You must log in or register to reply here.
Back
Top