Another high temps thread

[AzmoDeus]

i have a 2.4@2.7 (non HT) with stock voltages in IT7 max2 rev 2
(can't remember what thermal compound i have put)
i have the stock cooler
2 fans in front (in)
2 fans at the back(out)

the temps that i am getting from speedfan seem to be a bit high
while running folding i have 58
without folding i have 45-46

is it a problem with the abit sensors?
or is it something else?

i am not encoutering any problems at all so far but during summer i will be in a lot hotter place than the one i am now

any suggestions?

any help appreciated
8o)

 

[Bomber]

I had the original IT7 Max and found that the temperature probe on the cpu was about 6 degrees off (high). Those temps then are a little high, at load but not devastating.

 

[Dan_D]

I've found that Abit boards run closer to ten degrees too high. But like Bomber says could be as little as six degrees off.