Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
the asus a7n8x-e sucks at overclcokingOriginally posted by eli
also, has anyone heard any news about the Asus A7N8X-E deluxe compared to the A7N8X DLX?
Overclocking
Now is the point where Ill lose most of our readers. You may find yourself asking where our overclocking results are and Ill be glad to tell you: There are none. For an undetermined reason, this board did not take kindly to overclocking at all. I refuse to dismiss the potential of this board (ASUS continues to cater to the overclocking crowd), but am sad to report that even a 215FSB was not in the plans. Very relaxed memory, all the voltage available, and all the luck I could muster or steal didnt change anything. I wouldnt use my results as your sole decision factor, but this was my experience nonetheless.
Overclocking
The AN7s overclocking performance was dismal to say the least. With a chip capable of multiplier adjust, Kyle was barely able to get the board to boot at a 220 MHz FSB and thats with the help of his Koolance EXOS water cooling system. I could not get the board to stabilize at a 200 MHz FSB, let alone 210 or 220. My feelings on this were that the BIOS related multiplier and Northbridge voltage issues worked against me on this. At a 200 MHz FSB with my 2500+ CPU, I was pushing 2.2 GHz (11 x 200 MHz) which is by no means unattainable from that chip, but it comes close to its upper limit. If 2.2 GHz was out of the question, then 2.42 GHz (11 x 220 MHz) is a definite no go. And in my testing, I was using an Asetek WaterChill water cooling rig and Kingston PC4000 HyperX memory.
(Editor's note: I would like to emphasize here that we are using tried and true components on this board that have be validated far beyond spec on other platforms.)
Originally posted by Benny Blanco
I'd say if you aren't going for extreme OC, the AN7 looks REALLY good... has 4 usb ports on the back panel plus spdif in/out as well... the NF7-S only has spdif out... and only 2 usb on the back panel (u have to use the usb bracket/onboard header for 2 more).
Also I like the way the IDE ports are placed on the AN7 compared to the NF7-S.... Overall, I'd probably go with the DFI infinity over either of the abit boards anyway... anyway, hope this helps some.
Originally posted by DiscoStu
I agree about the board layout, the AN7 is damn near perfect IMO ...
Originally posted by Schro
Did you check the placement of the ATX power plug? That earned it a large blackmark in my book.
Yeah I really didn't like seeing that.Originally posted by Schro
Did you check the placement of the ATX power plug? That earned it a large blackmark in my book.