AN7 Vs. NF7-S

eli

[H]ard|Gawd
Joined
Apr 30, 2003
Messages
1,648
Has anybody heard anything good about the Abit AN7? does it perform as well as the NF7-S? If anyone has this board please post you overclocking results.



thank you,
eli morgan
 
i got the an7 it seems really fickle when overclocking. however if you wanna run it out of the box its a dream. maybe after a few bios releases it will be a better successor to the n7f-s.
 
also, has anyone heard any news about the Asus A7N8X-E deluxe compared to the A7N8X DLX?
 
I have one of each ... the AN7 is rock solid at default clocks but is not the O/C champ my NF7-s is ... the uGuru is next to worthless IMO and is more a gimmic then anything ... there is a new review on the main page for the AN7, i had many of the same issues they talk about ... as far as reccomending one or the other my vote would definatly go the NF7-S at this point ... once the AN7 matures it might get better ...
 
ASUS A7N8X-E Deluxe @ [H]
Overclocking
Now is the point where I’ll lose most of our readers. You may find yourself asking where our overclocking results are and I’ll be glad to tell you: There are none. For an undetermined reason, this board did not take kindly to overclocking at all. I refuse to dismiss the potential of this board (ASUS continues to cater to the overclocking crowd), but am sad to report that even a 215FSB was not in the plans. Very relaxed memory, all the voltage available, and all the luck I could muster or steal didn’t change anything. I wouldn’t use my results as your sole decision factor, but this was my experience nonetheless.

ABIT AN7@ [H]
Overclocking

The AN7’s overclocking performance was dismal to say the least. With a chip capable of multiplier adjust, Kyle was barely able to get the board to boot at a 220 MHz FSB and that’s with the help of his Koolance EXOS water cooling system. I could not get the board to stabilize at a 200 MHz FSB, let alone 210 or 220. My feelings on this were that the BIOS related multiplier and Northbridge voltage issues worked against me on this. At a 200 MHz FSB with my 2500+ CPU, I was pushing 2.2 GHz (11 x 200 MHz) which is by no means unattainable from that chip, but it comes close to its upper limit. If 2.2 GHz was out of the question, then 2.42 GHz (11 x 220 MHz) is a definite no go. And in my testing, I was using an Asetek WaterChill water cooling rig and Kingston PC4000 HyperX memory.

(Editor's note: I would like to emphasize here that we are using tried and true components on this board that have be validated far beyond spec on other platforms.)
 
I'd say if you aren't going for extreme OC, the AN7 looks REALLY good... has 4 usb ports on the back panel plus spdif in/out as well... the NF7-S only has spdif out... and only 2 usb on the back panel (u have to use the usb bracket/onboard header for 2 more).

Also I like the way the IDE ports are placed on the AN7 compared to the NF7-S.... Overall, I'd probably go with the DFI infinity over either of the abit boards anyway :rolleyes: ... anyway, hope this helps some.
 
Originally posted by Benny Blanco
I'd say if you aren't going for extreme OC, the AN7 looks REALLY good... has 4 usb ports on the back panel plus spdif in/out as well... the NF7-S only has spdif out... and only 2 usb on the back panel (u have to use the usb bracket/onboard header for 2 more).

Also I like the way the IDE ports are placed on the AN7 compared to the NF7-S.... Overall, I'd probably go with the DFI infinity over either of the abit boards anyway :rolleyes: ... anyway, hope this helps some.

I agree about the board layout, the AN7 is damn near perfect IMO ...
 
if you want the best OC'ing Nforce 2 board, it's time to get a DFI infinity or lanparty NF2... unless you don't want to be able to hit 250+ FSB.. ;)
 
Even without going for the super high overclock, I'd get the DFI infinity just because it has the si3114 (4 serial ATA ports), not to mention everything else you'd want in a motherboard at any price (especially $93). :cool:
 
I fried my NF7 v2.0, so I bought an AN7...

I am impressed with the layout, the price, the voltages, ect...

But overclocking kinda sucks.

My NF7 would do 210x12.5 (2.63ghz), but my AN7 will only do 200x12.5 (2.5ghz).

I hope a few bios revisions or a future volt mod will do the trick, but I am kinda disappointed right now. I fried the NF7 doing a volt mod and had the voltmeter slip onto a mosfet, so I am kinda debating whether or not to find that resistor and pencil it in on the new board since it is in a different spot. I will probably do this when I build my NB and GPU waterblocks.
 
I have an Abit NF7-S and it's a great board. However, I helped my friend build a rig witha DFI board and now I'm jealous. With my processor he can hit 15MHz higher FSBs...I am a believer. And jealous.:p
 
Originally posted by DiscoStu
I agree about the board layout, the AN7 is damn near perfect IMO ...

Did you check the placement of the ATX power plug? That earned it a large blackmark in my book.
 
Originally posted by Schro
Did you check the placement of the ATX power plug? That earned it a large blackmark in my book.

yea, unfortunately it seems that asus is the only one putting it in the right place... DFI isn't too bad, but I like it where it is on my a7n8x deluxe better... but that still won't stop me from getting a dfi sometime soon
 
Originally posted by Schro
Did you check the placement of the ATX power plug? That earned it a large blackmark in my book.
Yeah I really didn't like seeing that. :(
 
i had no trouble routing my cables around it ... and i honestly liked how close the ATX and ATX12V were to each other ... different tastes i guess ... :confused:
 
wow where did DFI come from
awhile back, i just remembered that there was the Lanparty that was all colorful and really really expensive
now DFI has made the "Infinity" and its supposudely really nice :eek: :eek:
 
Yea I'd say the NF7-S and the A7N8X DX are the dethroned kings of socket A... I really want an infiniti :(
 
DFI has been in existence - and has been making motherboards - since well before the Pentium I days, and some of their earlier motherboards have been renowned as solid, value-priced boards. But only with their latest, state-of-the-art LanParty series (their Infinity series of motherboards are essentially the LanParty series without a lot of the cool, flashy features) of motherboards did they really make a splash in the enthusiast's motherboard market. In one fell swoop, DFI had transformed from a stodgy motherboard maker that's a cut above the crappy PCChips boards to a motherboard maker that can hang out with the likes of Abit and Asus.
 
Yeah..DFI is really on top.



And their A64 mobos look like they're gonna kick ass:eek:
 
I HAD an AN7, right up until the time when it ate its own bios. It did this without any prompting (i.e. I did not change hardware, software, or bios settings, and hadn't flashed the bios in a week and a half), and was until then running a week without rebooting. Apparently this is a pretty frequent problem. Now don't get me wrong, the board was an absolute dream for me, and actually got me farther than my previous DFI LanParty rev A inito voiding my processor warranty (as long as you OC with the bios), but until they get a new board revision this board is a ticking time bomb. I hope nobody else gets to be a member of the 9.0 club - the post indicator for "bios dead."
 
I'll definatley be checking out DFI for my next mobo purchase.

Have to find someone that carries it locally (toronto).

Next step will be an A64 for sure, when the new sockets come out :)

Cheers,

Mr. Pain
 
I haven't look at a map recently and my memory fails me now but isn't Toronto just across the "river" for NY (or the USA for that matter)? Couldn't you just take a roadtrip on down to a place here that does have one? PM Angry Games (I think its him) and ask about locals for DFI, I know he's mentioned them before.
 
I had an NF7-S v1.1, V1.2, and v2.0. I also had the ASUS A7N8X DX. The boards aren't even close. I also lost the BIOS in the ASUS and had to RMA it.

I've had alot of Athlon boards from Slot A to now but the NF7-S V2 was the best board I've ever owned ever!
 
Back
Top