AMD Using TSMC for Fusion Chips

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
DigiTimes, citing anonymous industry sources, claims that AMD plans to use TSMC for its Fusion processors.

AMD reportedly plans to outsource wafer starts for its Fusion CPUs with integrated graphics to Taiwan Semiconductor Manufacturing Company (TSMC) using bulk 40nm process technology, and related backend services to Siliconware Precision Industries (SPIL), according to industry sources. Globalfoundries, AMD's spun-off fabrication arm, has also secured orders for the Fusion chips.
 
Hehe. I know why they are doing it, but man does it seem goofy. I mean if GF can do it, why not use them? Too expensive? lol
 
Wait...so they are producing Fusion chips at TSMC AND GloFo? They must be expecting huge orders of them.
 
Also means each one might have different performance/heat envelopes, so they can see which process would work best, for the price.
 
It could mean GF still couldn't manufacture those thing within acceptable yield... :s
 
TSMC cant keep up with the current orders they have now and AMD is putting even more orders in to TSMC expecting a magical fairy to spread pixie dust over the place and increase output to actually keep up with demand?
 
TSMC cant keep up with the current orders they have now and AMD is putting even more orders in to TSMC expecting a magical fairy to spread pixie dust over the place and increase output to actually keep up with demand?

that is call simplicity thinking there.

why would AMD use TSMC if they are horrible to keep up demand.

and when they are horrible and still using them, does that mean others are worse? ;)

you never know... we only see the surface, we ain't insiders... something is going on that we do not know...
 
with the billions TMSC stock holders just approved to growth and development, why not get in on the ground floor by putting in orders with them for your new processor... who knows maybe they approved that money to get this contract with AMD.
 
Scheduled for the first half of 2011.

The most interesting part is that these are being made on a bulk 40nm process, no SOI.
 
I can't see this as a good move. TMSC 40nm is really horrible causing big delays with both and and nvidia. They must be asking for a beating.
 
I can't see this as a good move. TMSC 40nm is really horrible causing big delays with both and and nvidia. They must be asking for a beating.

SOI is not the exact same as bulk. Of course, that's no excuse for bad yields :p
 
Scheduled for the first half of 2011.

The most interesting part is that these are being made on a bulk 40nm process, no SOI.

All of it, or just partial? I could see the GPU being that way, but all of the CPU's have been SOI for what, the past 5-6 years?

Perhaps the GPU is only part of a Fusion package, and that's what TSMC is making?
 
With both companies moving to CPU+GPU on silicon we might start seeing some really different benchmarks and motherboards in the next couple years. SLI will replaced with double, triple, quad socket motherboards to link all the cores and GPU's together.

Except for the Fermi edition, that will be called GPU+CPU.
 
All of it, or just partial? I could see the GPU being that way, but all of the CPU's have been SOI for what, the past 5-6 years?
Llano is graphics and CPU on one die. AMD had mentioned in the past that it may make future processors on bulk CMOS. Earlier this year (Feb), AMD did state that Llano would be manufactured by GF on 32nm SOI HK-MG. Intel is probably McLovin' it if the techeye article is accurate. :p
 
Here's what's going on.

Llano, the high(er) performance APU part, is going to be produced at Global Foundries on a SOI/HKMG "super high performance" process. Was going to be on 32nm but I believe that was cancelled so they've moved it to 28nm. This is for pretty much all the non super high end or super low end desktop / laptop parts.

Bobcat, the lower end APU part, is a fully synthesizable (and therefore can be built anywhere) part, and being built at TSMC on their 40nm BULK process (low power, slower). This is for the low end, more power efficient parts, and potentially more for things like netbooks and tablets (in theory) in addition to low end laptops and possibly desktops.
 
Back
Top