3WAYsplit
[H]ard|Gawd
- Joined
- Sep 26, 2001
- Messages
- 1,268
AMD 64 system boot up problems & RAID issues
------------------------------------------------------------------------
Windows XP Home
GIGABYTE "GA-K8VNXP" K8T800
AMD Athlon 64 3200+
MSI nVIDIA GeForce FX 5900XT Video Card, 128MB
Creative Labs Sound Blaster Audigy2 ZS GAMER
Maxtor 200GB 7200RPM SATA HDD
Maxtor 200GB 7200RPM SATA HDD
Plextor 12X DVD+RW/-RW Drive
Asus 16X DVD-ROM Drive
FDD
SAMSUNG 173V-Silver 17" LCD
------------------------------------------------------------------------
When I first started my system I put in Windows XP CD, and I got
a message that the install will stop because no HDD were found on this system... So I assume that I need to "format" the new HDD's but being
SATA Im not sure how to do it and they are going to be set up in a raid
array...
I think I was able to get the drives to be set in the raid, are they formatted??
Could it be possible that they are not set up right, how do I change them?? Do they have to be set up in the raid??
****
When I boot it up, it sees everything. The boot screen goes though the normal process but it stops with this message:
Verifying DMI Pool Data....
When it does get past that message, it gives me this message:
No HPA Enabled Drive Found, Press any key to boot
I need to format these drives, I would appreciate help. This is my 1st time using SATA drives and raid...
Im dont have any IDE HDD connected, and I dont have any availiable to use...
Please help me get these SATA drives setup..

------------------------------------------------------------------------
Windows XP Home
GIGABYTE "GA-K8VNXP" K8T800
AMD Athlon 64 3200+
MSI nVIDIA GeForce FX 5900XT Video Card, 128MB
Creative Labs Sound Blaster Audigy2 ZS GAMER
Maxtor 200GB 7200RPM SATA HDD
Maxtor 200GB 7200RPM SATA HDD
Plextor 12X DVD+RW/-RW Drive
Asus 16X DVD-ROM Drive
FDD
SAMSUNG 173V-Silver 17" LCD
------------------------------------------------------------------------
When I first started my system I put in Windows XP CD, and I got
a message that the install will stop because no HDD were found on this system... So I assume that I need to "format" the new HDD's but being
SATA Im not sure how to do it and they are going to be set up in a raid
array...
I think I was able to get the drives to be set in the raid, are they formatted??
Could it be possible that they are not set up right, how do I change them?? Do they have to be set up in the raid??
****
When I boot it up, it sees everything. The boot screen goes though the normal process but it stops with this message:
Verifying DMI Pool Data....
When it does get past that message, it gives me this message:
No HPA Enabled Drive Found, Press any key to boot
I need to format these drives, I would appreciate help. This is my 1st time using SATA drives and raid...
Im dont have any IDE HDD connected, and I dont have any availiable to use...
Please help me get these SATA drives setup..