ok, first off im a complete newb to over clocking. But with that said and my explanation you shall see its not my knowledge thats the problem i dont think.
first question is : should i be even trying to over clock on my build?
corsair 850w power supply (which im kinda thinking might be the problem)
2600k
asus maximus extreme z68 mobo
16gb of geil memory which was chosen for being the highest ammount of memory that was supported on the manufacturers list of supported memory. also it was a little cheaper and had good reviews.
2X gtx 275's in sli running X16
3X 7200 rpm sata hard drives
1X ocz agility 120 gb ssd sata 6gb
1X 500gb usb hard drive
corsaid H100 for cooling
and three big fans plugged into the board inside a HAF 932 case.
i guess my main question is, is it my PSU thats killing me? everything installed perfect, ran prime for 2 hours, cpu topped at the turbo spec of 3.9. So, feeling confident in my boards ability i figured id give the auto tune a go, and chose the 4.6. it took the clock, booted sucessfully to windows 64bit, then after 30 seconds of prime 95 it BSOD. so i thought maybe it could hack 4.6, so i throttled it back to 4.2, same exact response from the pc. Any ideas? just hoping someone can help before i drop money i dont have on an unnescesary PSU.
first question is : should i be even trying to over clock on my build?
corsair 850w power supply (which im kinda thinking might be the problem)
2600k
asus maximus extreme z68 mobo
16gb of geil memory which was chosen for being the highest ammount of memory that was supported on the manufacturers list of supported memory. also it was a little cheaper and had good reviews.
2X gtx 275's in sli running X16
3X 7200 rpm sata hard drives
1X ocz agility 120 gb ssd sata 6gb
1X 500gb usb hard drive
corsaid H100 for cooling
and three big fans plugged into the board inside a HAF 932 case.
i guess my main question is, is it my PSU thats killing me? everything installed perfect, ran prime for 2 hours, cpu topped at the turbo spec of 3.9. So, feeling confident in my boards ability i figured id give the auto tune a go, and chose the 4.6. it took the clock, booted sucessfully to windows 64bit, then after 30 seconds of prime 95 it BSOD. so i thought maybe it could hack 4.6, so i throttled it back to 4.2, same exact response from the pc. Any ideas? just hoping someone can help before i drop money i dont have on an unnescesary PSU.