8800GT in Crossfire board

Darkjestir

Weaksauce
Joined
Sep 27, 2001
Messages
97
I have been out of things for a while new family and all, but now that things have settled its my turn to have a little fun. I have a ECS KA3 MVP Crossfire board and I was wondering if I can put in an NVIDIA 8800GT card? .. I currently have a ATI X1950 Pro it right now it appears nothing can match NVIDIA for the price and performance, but I would rather not spend 200$ on a new board if I do not have to. My PSU is 400 watts should I expect any issues?

Thanks
 
Only problem would be if you wanted to SLI, but for the most part, you can stick one of any card into any motherboard (if you have the right slot that is)

You can pair an 8800GT with an ATI chipset, Intel, Nvidia, SiS, etc etc.
 
You wont have any issues depending on how good your PSU actually is.

Should be fine with one nvidia card (only 1 due to your mobo being a XFire board)
 
Thanks all I appreciate the feedback, it is just the standard 450 that comes with the raidmax cases
 
You won't have a problem with a 400w powersupply and an 8800GT, unless of course you're running quad-core, overclocked, with three or more drives...or you bought the absolute cheapest, crappiest 400w powersupply in existence. The x1950 Pro you're replacing uses almost as much power as the 8800GT, the difference is less than 20w.

Of course, we can quell your fears completely if you give us e the full specs of your system, and either the brand of your PSU or the max amps on the 12v lines.
 
Back
Top