8 pin in 4 pin

lollerskater69

[H]ard|Gawd
Joined
Jan 3, 2009
Messages
1,231
Can this work? I run 4 pins in 8 pins all the time, but never ran into this predicament before.

I would assume no considering it doesn't even latch on, but I would like to hear from you guys. Thanks.
 
I would assume this would work. It is keyed to go in only one way.
 
most 8pins can split into 2 4pins... (the second is useless, if so).

Electrically, it can fit. Just make sure your motherboard has clearance for the additional 4pins hanging off of the side (if the extra 4pins are not detachable).
 
Most PSUs have either a 4-pin and an 8-pin connector or an 8-pin that splits in half. Double-check to see if you have one of those two options. If not, then you can use the 8-pin providing you have room for half of it to hang off the edge as jeremyshaw pointed out, but it's not an ideal solution.
 
Ultimately it is best awnsered by your specifications for your CPU as that is what defines its power consumption. Generally unless you are using a lower draw CPU I would advise having a matched 8pin power connection from your power supply to your moterboard. You should take in consideration all information though in regards to how many AMPS and rail design your PSU offers. In the end check your CPU though. Hope this helps and please enjoy the rest of your day.

If you have any ROG feedback please visit my thread.

http://www.hardforum.com/showthread.php?t=1466816
 
Juan Jose: you are on a roll tonight! Awesome to know ASUS has a presence here!
 
Back
Top