• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

7800 Waterblock Help

A

amish_p0rnst4r

Limp Gawd
Joined
May 18, 2005
Messages
180
Ok so here's the deal....

I already have the following for my new build...

Build will use 1/2" Fittings/Tubing (7/16" Tubing Possibly)

D5 Pump
DD BIP 120.2 Radiator
DD Fillport
Apogee CPU Block
Panaflo 120mm Fans

So my problem is kinda this....

I'm looking for a waterblock for my XFX 7800 GT Vid card (I'd perfer one that cools ram the pads also mainly for astecically pleasing value) Otherwise I'll just be going with a Silverprop CycloneFusion HL...

Now from my research I find the -

Nv-78 from Danger Den that uses 1/2 barbs

The following state they use 3/8 or 1/4 fittings so would adapters be a waste of time on my loop with one of these

I mean if not how would you go about connecting them

Innovatek g70 -

http://www.frozencpu.com/ex-blc-179.html

Aquagra 7800

link is to the 6800 but same fittings

http://www.sharkacomputers.com/aqcoaqfx68r2.html

Koolance l06

http://www.frozencpu.com/ex-blc-147.html
 
Well if you want to keep up the flow rates you could run both video card blocks in parallel.
 
You must log in or register to reply here.
Back
Top