$700 Xbox 360 Case

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Normally this is the part where I make fun of a console case that costs almost $700 but this thing is too pretty to pick on. Damn, where is that extra seven hundred bucks when you need it? The company makes impressive HTPC cases as well.
 
The HeatSync Three-Sixty can be rack mounted (how cool is that!) using our optional 2U one-piece rack mount faceplate. Now you can have a game system that matches the rest of your high end audio and video components.

Huh?
 
I think that would look pretty fugly sitting with all my other consoles and stuff on my entertainment center. Plus I don't see how they get off charging $700 for a case alone?! For that much, it better already have all the hardware inside it and come with a few accessories. Very doubtful it sells well, esp. at that price point.
 
That is a nice case. I agree if it had the hardware inside it, it would almost be an acceptable price.
 
It's a nice idea but poor execution. I mean come on, having the cutouts for the usb and memory card slots being optional? Also it looks like that changing out the HDD is going to be a pain in the ass to do physicall, if it's even possible.
 
Nice HTPC cases, but the rape is too painful. They want $18 for an IDE cable? $50 for a Microsoft Infrared Receiver?? LMFAO
They need to knock their prices down at least half before I would consider it.
 
You get waht you pay for. These guys make top notch uber quality stuff, and for the most part they do it to order. You want cheap, go Antec or Zalman and then whine about how you wish you could get rid of the useless VFD and volume knob.

These guys will also build thing to order. Want something very specific? They can do it.
 
The case has one major flaw:

The case is designed to be fanless, as such the heatpipes go straight to sides of the case to dissipate heat.

Why then would the designer integrate a thermocouple into the CPU and GPU heatsink mounts to turn on an internal fan?

The fan doesn't blow on any part of the heatsink (sides of the case), it sucks air into the case and blows it out the back. Thus the fan is almost useless.
 
The design is good turning the case into a big heatsink like they do for car amps.

Personally I think it looks like crap, reminds me of a space heater.

Maybe they could sell it for $7 cuz I can think of 98473587485348573957347593 things better to buy than that thing.

Unless you live in a mud hut in the desert i dunno wtf you need that for.
 
I agree, it looks cool, but its definitely not worth $700 for a case. $700 is a PC upgrade these days.
 
Rackmounted 360 sounds pretty damn awesome


Seconded. I love the rackmount idea.

I wonder if you can swap out the DVD drive for a Blu-ray drive. I'd have to create a dual-boot operating system for the Blu-ray support, wouldn't I?
 
Who in their right mind would actually buy that? you can buy 3 xbox systems for that price.
 
It's $700 because they are aiming it at the uber rich who have the high end home theater setups....... Nice stuff, but talk about a scam.... Probably 50 bucks in materials in there, and 10 hours or less of work to produce it. $250 is probably a more realistic price, but like I said they figure some guy who just spend some huge amount on his home theater probably won't bat an eye....
 
Making things that aren't mass produced takes a lot of time and buying materials on the small scale costs more than in bulk. I do agree the thing is expensive but I see quite a few mass produced cases above 200 on Newegg that don't have anything fancy like built in cooling and heat pipes. I do think 700 is too much though. Don't think they will sell many at that price.
 
Who in their right mind would actually buy that? you can buy 3 xbox systems for that price.

This may come as a shock to you, but some people who read this website are exceedingly wealthy and 700, 7000, or even 70,000 is small beans for them. For people that have $5000 Marantz Blu-ray players or $30,000 Martin Logan speakers, $1000 for an elegant solution that is able to fit in an AV rack is bought without second thought.
 
$1000 for an elegant solution that is able to fit in an AV rack is bought without second thought.

It looks like it's an elegant solution, but it's really not. There are a few design flaws to it.
First off being, why would you want to hide a 360, or any game console for that matter, away in a rack? At this pricepoint most things are hidden and tucked away. It's not like you'll want to have a rack right there beside you.

Second, the cooling design looks a bit suspect to me. That heatpipe sits waaaaaaaaaaaaaaaaay to close to those caps on the MB. WIth the amount of heat it can generate you probably would not want to have any equipment within 2U of that thing in a rack.
 
Those guys took the time and did it right. The aircraft aluminum, although maybe overboard to some, is an excellent touch. Much thought went into designing this alternative housing, and it shows.
 
For something made completely in the USA, I'd gladly pay 700 bones for it.

Now, I wish I had 700 bones for it to back that up. :(
 
this makes we want to figure out how to rip apart my 360 and put it into something besides my ass to make it silent. suggestions please?

you have to email me since i can't get responses since hardocp dosen't like hotmail.

nosuchluck1970@ you know.

thanks!!!!!
 
1: Xbox360 heatsinks in appropriate places.
2: Weld heatpipes to copper/aluminum/silver/diamond chassis
3: Enjoy
 
there are numerous cases designed to cool the 360 better, not all of them are this stylish though. unfortunately, the real thing youre paying for in this case is the fanless design, which really isnt necessary.
 
First off being, why would you want to hide a 360, or any game console for that matter, away in a rack? At this pricepoint most things are hidden and tucked away. It's not like you'll want to have a rack right there beside you.

Some home theaters have racks in the same room and very close to where you are seated. Blu Ray players would also be there, etc, so it needs to be accessible. It creates more space in the room by keeping components flush inside the wall.

That said, I'm not really a fan of this case. I think its a nice idea but I personally wouldn't buy it, especially since there are custom 360 rackmount cutouts that work just fine and IMO look better.
 
Great idea...but in the middle of a recession thats where it should have stayed.
 
The case has one major flaw:

The case is designed to be fanless, as such the heatpipes go straight to sides of the case to dissipate heat.

Why then would the designer integrate a thermocouple into the CPU and GPU heatsink mounts to turn on an internal fan?

Because any design has inherent limitations, if ambient temps were really high or it was squeezed in with other components it would run hotter. For this price the very least they could do is add the fan for piece of mind.

The fan doesn't blow on any part of the heatsink (sides of the case), it sucks air into the case and blows it out the back. Thus the fan is almost useless.

The heatsinks are the sides of the case so it's inevitable that the airflow cools them some, plus if it were at an elevated temperature you don't only want to cool the heatsink more you want to cool the other components like capacitors, 'fets. Compare it to a PC exhaust fan, that doesn't blow on any heatsink either it just gets the interior ambient temp down.

Suppose the interior ambient were 30C with the fan on, and the heatsink keeps the processor at 50C rise over ambient temp so you have it at 80C. Much better than having an interior ambient of 50C and processor at 100C.
 
Somehow I don't think this will help prevent the Red Rings of Death.

Nope it won't. Nearly all RRoD's are from the BGA socket for the CPU failing, where it no longer makes sufficient contact with the interconnects.
 
Back
Top