6 Essential Tips for First-Time PC Builders

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
LifeHacker has six essential tips for n00b PC builders. Experienced builders call this stuff "common sense," but we probably all know someone that could use this advice.

Chances are, your motherboard, video card, and other components came with a CD or DVD filled with drivers and other software. Generally, we recommend skipping these. By the time you build your computer, the drivers are probably outdated, and the discs often come with other software that you probably don't want.
 
Totally disagree with the driver discs..
In MANY cases I have needed it to install the ethernet driver so that windows update can take care of the rest. Same applies to most RAID cards and other specialties. I've also had them resolve new machine BSOD's due to craptacular built in windows drivers.. You can always update them later.
 
Totally disagree with the driver discs..
In MANY cases I have needed it to install the ethernet driver so that windows update can take care of the rest. Same applies to most RAID cards and other specialties. I've also had them resolve new machine BSOD's due to craptacular built in windows drivers.. You can always update them later.

You don't have a USB flash drive? :confused:

I guess you could install the driver the from the provided CD and then download the latest off the manufacturer's website.
 
Totally disagree with the driver discs..
In MANY cases I have needed it to install the ethernet driver so that windows update can take care of the rest. Same applies to most RAID cards and other specialties. I've also had them resolve new machine BSOD's due to craptacular built in windows drivers.. You can always update them later.

I don't think the target audience for that article would likely have issues with RAID cards since they're unlikely to even know wth that is ;)
 
I'd say about 90% of all CD/DVD's are obsolete before you open the box.

Welcome to the Internet, where you can download the latest driver(s) and manual!

Well, except for ASUS ... :D

It will be a none-issue pretty soon. More companies are just including links with the products, and Win8 and Ubuntu are pretty freaking good at running without driver disks.
 
I'd say these are spot on. As for included discs, I can't remember the last I needed one, they are universally useless. Downloading to a flash drive in case you can't get a network connection on install is your friend.
 
Wow. I am usually unimpressed w/ these types of articles, but I bookmarked that one! Great tips, especially the TIM and airflow bits.
 
Totally disagree with the driver discs..
In MANY cases I have needed it to install the ethernet driver so that windows update can take care of the rest. Same applies to most RAID cards and other specialties. I've also had them resolve new machine BSOD's due to craptacular built in windows drivers.. You can always update them later.

I think you just glanced at the article instead of actually reading it. They specifically said you might need to use the discs for the ethernet driver (assuming you don't have another computer and a flash drive to get them direct from the internet).
 
I think you just glanced at the article instead of actually reading it. They specifically said you might need to use the discs for the ethernet driver (assuming you don't have another computer and a flash drive to get them direct from the internet).

I haven't needed an ethernet driver since win7
 
Footnotes:
1) DO NOT PUT THE MOBO on the electrostatic bag when testing.

2) Look at the bottom of the heatsink. Some have plastic to stop oxidation. Remove it.
Verify nothing is hitting on the bottom of the heatsink mount. As soon as you boot, go into BIOS at look at temps. If it is climbing after 50°C, you've screwed up.

4) All fans blow outward from the "nameplate data" sticker. Some mobos need you to tell them whether you are using 3 or 4 pin case fans for speed control, this only happens on mobos with 4 pins system fans. CPU fans should always be 4 pin. Make SURE you use the CPU mobo fan socket for CPU fan.
 
IMO, keep the disks but don't start with them. They're occasionally needed in the instance that your OS is "mature" (Windows 7 and prior) and your hardware is using newer chipsets and features.
 
They forgot a bit one:
USE A GROUND STRAP
Of the 100s of computers I have been inside I have never had a problem with simply touching chassis before proceeding. My grandfather said they same thing the other day when I was showing him how to replace ram in his laptop, but he worked at NASA. Only electronic I have killed with my finger/hand was a powered (in use) hard drive, I brushed against the circuit board.
 
I'd say these are spot on. As for included discs, I can't remember the last I needed one, they are universally useless. Downloading to a flash drive in case you can't get a network connection on install is your friend.

I don't use them if I don't have to, but they shouldn't be ignored. They should be kept track of until the machine is built, running, burned in and proven stable. Maybe I'm just paranoid form days of old, but I've been screwed by the latest and greatest breaking my not so latest and greatest on board whatever and my only choice of something that works is what is on the disk, even if it is out of date.
 
I don't use them if I don't have to, but they shouldn't be ignored. They should be kept track of until the machine is built, running, burned in and proven stable. Maybe I'm just paranoid form days of old, but I've been screwed by the latest and greatest breaking my not so latest and greatest on board whatever and my only choice of something that works is what is on the disk, even if it is out of date.

I certainly wouldn't throw them away, I would keep them in the box just in case, but the odds of actually needing them these days are pretty rare.
 
Of the 100s of computers I have been inside I have never had a problem with simply touching chassis before proceeding. My grandfather said they same thing the other day when I was showing him how to replace ram in his laptop, but he worked at NASA. Only electronic I have killed with my finger/hand was a powered (in use) hard drive, I brushed against the circuit board.

I used to do the same thing. Every now and then touch the case to discharge myself. Until one day I was changing video cards, and while adding the new one I felt the tiniest little zap. I laughed to myself and jokingly said "there goes the video card!" I wasn't laughing for long. I could not lower my morals to return the card because of something stupid that I did.

I've checked complete rookie builder's unstable Win7 build machines, machines that blue screen. These people say ridiculous stuff like the voltage on their ram isn't correct for their processors. After checking all documentation, bios settings, and cpu/mobo manufacturers specs I tell them the voltage is fine. The next question is: did you use a ground strap when you built the system? Nope! A run of memtest86 shows bad ram. The full explanation I give isn't believed, and they insist on repeating the voltage story over and over again. Eventually they RMA the ram, and at my insistence use the ground strap to swap the ram. The system is now stable with no blue screens and no memtest86 errors.

The facepalm moment comes when they again insist the problem was ram voltage. That was also the last time I voluntarily helped anybody with their computer problems.
 
They forgot a bit one:

USE A GROUND STRAP

No.

In over 15 years, I've never used one and I haven't fried a damn thing yet.

People can continue swearing by ground straps, I'll continue swearing by touching a grounded (plugged in) PSU.
 
I used to do the same thing. Every now and then touch the case to discharge myself. Until one day I was changing video cards, and while adding the new one I felt the tiniest little zap. I laughed to myself and jokingly said "there goes the video card!" I wasn't laughing for long. I could not lower my morals to return the card because of something stupid that I did.

I've checked complete rookie builder's unstable Win7 build machines, machines that blue screen. These people say ridiculous stuff like the voltage on their ram isn't correct for their processors. After checking all documentation, bios settings, and cpu/mobo manufacturers specs I tell them the voltage is fine. The next question is: did you use a ground strap when you built the system? Nope! A run of memtest86 shows bad ram. The full explanation I give isn't believed, and they insist on repeating the voltage story over and over again. Eventually they RMA the ram, and at my insistence use the ground strap to swap the ram. The system is now stable with no blue screens and no memtest86 errors.

The facepalm moment comes when they again insist the problem was ram voltage. That was also the last time I voluntarily helped anybody with their computer problems.
I just make sure some part of my arms/hands are touching bare metal in the case when I install things, also avoid working on surfaces that can build static easily or cause my body to build static easily. I think it probably matters more if you live in a very cold and dry environment where static can build up a lot, I could imagine in some places, even with a ground strap on one arm, you'd risk zapping things with your other hand.
 
My biggest suggestion is to keep the case box. If you have to move there is nothing better to pack up your pc in the box it came in to move it.
 
No.

In over 15 years, I've never used one and I haven't fried a damn thing yet.

People can continue swearing by ground straps, I'll continue swearing by touching a grounded (plugged in) PSU.

+1

I won't swear to either touching a grounded PSU or to straps, I just never killed anything without ever wearing one. I touch the chassis often, and I'm holding some kind of grounded metal, without fail, before I touch a component.

Only thing I didn't really see is a small cache of cables and/or screws. Have had to go to my "box" bin more than I care to count.
 
Maintaining the positive pressure with more intake than exhaust fans seems like a great idea. I might do that on mine since I have dust issues.
 
Much like when you're hot in the summer, the most effective fans is the one that aims at what you want to cool.

I laugh when I hear people talking about fan pressure. No such thing at under 70mph, and very little at that speed. I run six 1.5a fans in a 1U case, that's over 100w of fan and sounds like a jet taking off. There is no pressure, just airspeed inside that case. If anything, it's lower pressure from that Bernoulli guy thingy.
 
1. Figure out what CPU and motherboard you want to build, then research what will and will not work with it.

And planning the build should be 2nd on the list ahead of bread boarding, also keep the discs, because windows 7 doesn't know what USB 3.0 is.
 
Much like when you're hot in the summer, the most effective fans is the one that aims at what you want to cool.

I laugh when I hear people talking about fan pressure. No such thing at under 70mph, and very little at that speed. I run six 1.5a fans in a 1U case, that's over 100w of fan and sounds like a jet taking off. There is no pressure, just airspeed inside that case. If anything, it's lower pressure from that Bernoulli guy thingy.
The difference between positive and negative pressure is mainly for the sake of dust build up and is also dependent on the case setup (my Antec Sonata 3 had more fans blowing out than in, so negative pressure, but the air that was being pulled in came through the front filter, so built up very little dust).

You also have the fact that blowing air is more directional than sucking air. You can blow air in a directed column, you can't really suck air in a directed column. Makes a sucking fan better for removing excess heat in a space that is floating around, but a blowing fan is better for localised cooling of a specific spot.
 
The dust builds up from static. Even on electronics with no fans, the static charge draws dust like a magnet.
 
2 Questions:

1. Can you shock a part and have it still work, but have issues?
2. Do you humidifiers help?

It's been years since I've used a wrist strap. I honestly thought it was a load of bullocks. But hearing one of your stories about how you shocked the vid card while now and then touching the chassis has me concerned lol! I get a new gpu tomorrow!
 
I remember being crazy scared during my first build. I'd worked for months to save the money for all the components, and I ordered them piecemeal. When the last item came—the CPU—and it was time to put it all together I was a nervous wreck, particularly in regards to installing the CPU. It was a Socket A motherboard and an Athlon XP processor. Did I align the CPU right? Is this enough thermal paste or too much? Do I really need to apply this much force to install the heat sink? Dear God don't let my hand holding this flathead screwdriver slip and rake across the motherboard!

But when it was all together and I turned on for the first time to be greeted by the boot screen . . . aaaaaah. Orgasmic.
 
They forgot a bit one:

USE A GROUND STRAP

I have built countless computers without using a ground strap, not a single one ever got damaged. I am beginning to think using one of these is an urban myth.

If anything I would wear rubber fingered gloves. :D
 
The difference between positive and negative pressure is mainly for the sake of dust build up and is also dependent on the case setup (my Antec Sonata 3 had more fans blowing out than in, so negative pressure, but the air that was being pulled in came through the front filter, so built up very little dust).

You also have the fact that blowing air is more directional than sucking air. You can blow air in a directed column, you can't really suck air in a directed column. Makes a sucking fan better for removing excess heat in a space that is floating around, but a blowing fan is better for localised cooling of a specific spot.

This.

An intake filter and directional airflow makes all the difference.
 
I never use a ground strap, but I would never say it's a bad idea. Much like booting with a screwdriver (hit the two PS (power switch) pins briefly), or working on the fans with it running, it's not a good idea, but it works fine if you're careful.

Yeah putting the CPU in is scary. It's heavier than it looks. Notice that the most sockets have 2 finger dents, and the chips often align notches on the outside that match the socket. On older AMD stuff, look at the bottom of the chip. It has an asymetrical pattern of missing pins in the middle. Just hold it so the missing pins line up.
 
Back
Top