500 FSB without increasing voltage?

natty

Limp Gawd
Joined
Apr 7, 2008
Messages
163
I'm looking for P45 boards that can do 500 FSB without increasing any voltages...
 
you're asking a board that supports up to 1600fsb to go an additional 400mhz with out any voltage increases? do you plan to go with sub zero cooling?
 
I have a slight different question with regard to the P45 chipset. Intel has spec of 1.21v of absolute max voltage. However, I see a lot of people setting their MCH as high as 1.3~1.4 for FSB 450+ How safe is it to use voltage in that range?
 
I don't think you'll have much luck finding such a board, although I'll confess I'm confused as to why you'd be concerned about raising the voltage? A good overclocking board like my lovely Gigabyte EP45-UD3P will handle extra northbridge voltage without any trouble at all and stays cool, so there is no need to stay within Intels rated spec.
 
500MHz FSB without voltage bump?

Kinda asking a bit much there...
 
just because a board advertises 2000mhz fsb doesn't mean you won't have to give the cpu some voltage to get it at 500mhz fsb. if you've read some mobo reviews, you'll notice that the 500mhz overclocks were done with very low cpu multipliers. the south bridge communicates with the cpu through the north bridge, the cpu accesses memory through the north bridge. at some point one or more of those primary junctions in that mobo is going to need a boost in voltage to be able to communicate with the other at 500mhz.
 
Tbh, try back in a decade or 2 when mobo/cpu's use something more efficient than copper/gold traces and you might get that then.
 
With a C2Q, it won't happen.

With a C2D... Many will, easily.
 
I've read good things about that Asrock mb.

I think you will need a golden cpu to acheive your goal.
 
I'm talking about motherboard voltage not CPU voltage. I don't mind increasing CPU voltage. What I wanna avoid is having to play with mobo voltages.
 
Back
Top