My problem............
I can't get to 4.5Ghz, the Bios Freezes.
I've tried up to 1.355v... haven't gone any further....
Reason I haven't pushed much further is, I can do 4.4Ghz on 1.26v with Load Line @ level 5, so 1.3v... hell.. 1.355v should be PLENTY!!
Parts.
2500k
Gigabyte GA-Z68XP-UD3P - F3 Bios
G.Skill 1.25v 9-9-9-24 8GB (2x4GB)
212+ Single Fan - temps are 53c on load for 4.4Ghz (Prime95)
Bios will freeze with following........
Multiplier - 45x
BCK is locked @ 100.
PWM Freq Control - Auto
CPU Over Current Protection - Auto
Internal CPU PLL Overvoltage - Disabled
Real-Time Ratio Changes in OS - Enabled
Load Line - LVL6
CPU Core - 1.30v - I've tried up to 1.355... still freezes.
QPI/VTT - 1.050
System Agent Voltage - .925v
CPU PLL - 1.800v
Everything else is set to AUTO.
II would think I still got room left with only 1.26v needed and Load Level 5 for 4.4Ghz.
Why does 4.5Ghz freeze?
Is there a setting I need to change to get to 4.5Ghz or above? I feel like I got a great chip here to work with, but something is limiting me......
Thanks!
I can't get to 4.5Ghz, the Bios Freezes.
I've tried up to 1.355v... haven't gone any further....
Reason I haven't pushed much further is, I can do 4.4Ghz on 1.26v with Load Line @ level 5, so 1.3v... hell.. 1.355v should be PLENTY!!
Parts.
2500k
Gigabyte GA-Z68XP-UD3P - F3 Bios
G.Skill 1.25v 9-9-9-24 8GB (2x4GB)
212+ Single Fan - temps are 53c on load for 4.4Ghz (Prime95)
Bios will freeze with following........
Multiplier - 45x
BCK is locked @ 100.
PWM Freq Control - Auto
CPU Over Current Protection - Auto
Internal CPU PLL Overvoltage - Disabled
Real-Time Ratio Changes in OS - Enabled
Load Line - LVL6
CPU Core - 1.30v - I've tried up to 1.355... still freezes.
QPI/VTT - 1.050
System Agent Voltage - .925v
CPU PLL - 1.800v
Everything else is set to AUTO.
II would think I still got room left with only 1.26v needed and Load Level 5 for 4.4Ghz.
Why does 4.5Ghz freeze?
Is there a setting I need to change to get to 4.5Ghz or above? I feel like I got a great chip here to work with, but something is limiting me......
Thanks!