1155 ITX Tower heatsinks

[nlancaster]

I have been unable to find information on what Tower heatsinks might be compatible with the Asrock Z68 ITX board. I have searched thru threads here and found nothing much, I think this thread could be a good resource for others as well.

Anyone have any information?
What Towers will fit?
What large regular heatsinks will fit?

I don't want to buy a bunch of coolers and find out the hard way which ones work.

 

[MrSmegzabush]

I have an older H55 Mobo with a Silverstone SG04 Case, I used this Sythe SCSK-1100 in mine and it fit with about 0.5 cm of clearance under the PSU.

http://www.newegg.com/Product/Product.aspx?Item=N82E16835185097

 

[ramPage16]

Your best bet is the AXP-140. Largest heatsink that will fit. That or go with an all-in-one cooler like the H60.

Here's a build log of someone who used one.

 

[nlancaster]

Yeah was looking at the AXP-140, But because of modifcations to my case I have no height limit other then 7 inches to the side of the case.

I will be getting pictures of my Modded PC-Q11B up later today.

 

[nlancaster]

Well built my Q11 today, after modding it on Saturday.

And this is why I am interested in a tower heatsink.

I will get better pictures up on Tuesday, the camera I have here is having problem focusing.

Specs,

i7-2600K
Asrock Z68ITX-HT
8GB Supertalent 1600MHZ DDR3 (2x4)
Zotac GTX 560Ti AMP! - 950MHZ Core - 4400MHZ Memory
Slim Slotload DVD-RW
OCZ Vertex 2 120GB SSD (Sata 2)
Seagate 1TB Barracuda
Silverstone 450W PSU
140mm Front Fan
120mm Back fan!!

And yes I know that the 4pin CPU power was not plugged in. Found out when tried to turn it on -