Search results

i havent seen any where that does this, however, today i bought a 4400x2 athlon 64, and this is a very good pic of the heatsinc off of it...

ada4400daa6cd > found what this means ccbwe 0537rpmw 1352907i50092 but what the other lines mean i do not know, would anyone care to elaborate? i'm guessing the 0537 is the date of manufacture, and the ccbwe is "stepping", but the rest...?? and what is stepping, and how does it affact...

buy a fat new heatsinc and fan for th cpu use stock AMD (70mm) fan and a zalman blue 47 thing - works wonders, and is silent as fuck it only runs at 3000 ish rpm, but being 70mm it is quiet compared to smaller fans

using a probe type thing, little digital readout attatched to a temp sensor on a wire, you can get em off ebay for like £5 attatched to the underside of the heatsinc. found that if you add a couple of those little red washer things you get with motherboards to the back of your mobo round the...

instead of micro fans, anyone tried a laptop blower type fan? i really think someone needs to make a decent nforce 4 cooler the temps on my nf4 are like 40ish according to a little thermometer i have, and windows has started crashing, tellimg me i'm overclocking, and i'm not (anymore)

have a zalman on it at the moment.....i dont thinik its sitting streight to be honest, and i just want the replacement nylon pins......:)

i've had this motherboard since jan, and i changed the chipset fan for a new zalman blue thingie, its all fitted and it seems to work, but the air inside the case seems a lot hotter than before i was just wondering wether anyone has done this recently, or has some temps i can use for...

This^^^^^ i emailled asus, i assume they'll mail back soon.....

whats the best ram timings / mem speed for this board, i have corsair twinx xlpro 3200 1024mb ram , currently running at 210 mhz (420ddr) @2.2.2.5, would higher mhz and higher timings be better overall? for instance, 220mhz and 3.3.3.6 or something got a 3500 winnie in this board, and...

basically what i wanna know, is this good or bad..... fsb / dram : cpu/22 on cpu z mem page i'm running a 3500 @ stock corsairxlpro 3200 (2.2.2.5) it seems to be running @ timing, but if that 22 means its running at half of my 11x fsb multiplyer, that means its a cpu 1 / dram 2...

actuall, befor i got my replacement gt6800, i was using a pci s3 verge to play with windows, etc, flash the bios, because of all the trouble i'd been reading about and i saw graphical corruption on mine too i borrowed a fairly new pci tnt2m64 and this worked fine - and since its all got put...

having just got my gfx card back (first one was DOA), i've just tryed to overclock it in coolbits i've got it to 440 core, and 1.12 ram - is this good? (leadtek px6800gt) i was just mainly posting to point out some strange "error" on my configuration i didnt ask it to...

not so sure if that'll work to be honest, maybe i'm far to sceptical tho thanks for the replies tho :) would it be possible to make a 6pin -> 2 6 pins? in case it doesnt?

i have an a8nsli (yup you can see the shit hit the fan here, lol) it requiers 18 a on 12 v does this mean i should buy an single rail with about 28 a on a single rail, or would a duel rail with 18 on each work too? i have an enermax one a 600w thing, with 18 on each i have a 6800gt a...

possibly off topic but can the second sli port be used for 1x standard pci-e stuff if not in sli mode or have i misunderstood the manual if it is its a nice thing to have thanks for answering

yeah, it was just a thought, i knew i'd seen it somewhere. in that case its probably the hard drives firmware then, and not the board think about it, it possibly could just be that..... if you and someone else have different firmware and one isnt compatable, and its the most widely...

a while ago (while i was researching what i should put into my new pc) i stumbled across a post about maxtor sata hard drives not working properly with some sata products, apparently this was because they were bridged ata 133 devices, rather than native sata, maybe this is still true, and its...

if the zalman doesnt interfere with the gfx cards i may purchase one, because that fan is way too loud, , what gfx cards are you using btw? i have a leadtek 6800gt, and it doesnt look like theres any chance that that'd fit in with a big heatsink in the way anyone got a setup like this?

Graphics Interchange Format is what it stands for, and is therefore an acronym G.I.F, how would you say that? definatly not jif for jif is lemon juice u crazy f00ls, lol these are the rules of the english language, enough said most people in america seem to thing colour...

the graphics card was monged i think, maybe, enermax have just brought out a new power supply same specs, for SLI, check their website, i'm going to see if i can get them to swap it out for me, or at least find out wether there is much difference, i mean, i dont really want to buy 2 new psu's...

i currently have an asus a8n-sli deluxe, a leadtek gt6800 and a 3500 with 1gig of corsair xlpro3200 i cant get my pc to boot with a pcie gfx card ( leadtek one ) but i can get it to boot with a pci normal s3 verge dx thing from like 1997 (i'm not overclocking YET - going to try and get...