Search results

haven't heard of galaxy but i'm a fast learner.

Not a hot deal. No digg for you. Wrong website. my bad.

These things have been around for as long as I can remember. Although this one is a very nice one. Still its not a hot deal.

OK. Guys I fixed it. Was my bad. It turned out to be a power problem. I had my hd plugged in on the same line as my video card. The card was sucking up too much power. This is why the windows desktop was fine until I had to load something. It also explains why I could surf with no problem but...

Yes I formatted the drive. I have also done a defrag.

My pc started getting really slow but not all the time. It seems like it runs fine untill you try to load something. It doesn't do it every time consistantly though. I have an abit ai7 (socket 478) board. I run a 1.8 ghz intel at 2.3. Right now i'm running everything at stock speed (failsafe...

I am planning my conroe system and am waiting for an ASUS implementation of the nforce 590 chipset. I have not heard a damn thing yet. Does anyone know if ASUS is working on this?

I am preparing to build a system around the new conroe core 2 duo chip. This will be a gaming pc and I will probably do some overclocking. I'm a little confused on picking the ram because it looks like the core 2 duo bus runs at 1066. The fastest ram that I can find is made for 800 mhz bus. Does...

X connect has a bad rep. On the other hand X2 is not too bad.

http://www.supermediastore.com/supermedia-4-gb-usb-20-usb-flash-drive.html

MB Quart makes a damn good speaker. Thanks for posting.

Thi looks pretty good to me. Thanks

I like to keep my voltage boost to within 10% of stock. This is more of a personal preference and I don't beleive there is any hard and fast rule. It is my personal opinion that any chip should be able to handle a 10 percent bump with no negative impact.

I'm researching my next system. I'm planning on buying a dual core chip in july when the prices get cut. I thought I was gonna just do a socket 939 system with an asus a8n32. I plan on overclocking it as close to 3 ghz as I can get. Ive been thinking though. The am2 socket chips are not any more...

Abit ai7. My mb fan died so I just unplugged it. FSB is 128 (stock speed is 100). No issues. I would not worry about NB cooling unless you are overclocking hard.

I'm gonna say no because your water from the peltier hot side eventually goes to your cool side tank negating the effect.

^^ What he said.

3800 should get somewhere in the range of 2.4 - 2.6 Ghz with the stock cooler. You will will want to run prime95 or some other stress testing program to make sure its stable. You will want to measure your temp while you are stress testing as well.

Shhhhhhhhhh! Keep it on the down low.

The 4 pin molex is what your power supply has on it for connecting drives etc... It should allow you to connect it directly to the power supply instead of using the 3 pin fan connector on your motherboard.

Well yeah I have a windowed case. Its only a matter of time before she catches on. I'm just going to prolong it for as long as I can. Hopefully by the time she figures it out I will be filling the loop about to throw the switch.

I've got a little clandestine watercooling operation planned myself. My wife does not suspect a thing. Keep it on the down low.

I think you wanna have the fans pulling air in from the outside because the air outside is going to be cooler than the air in your case. Correct me if i'm wrong cause im new to watercooling myself.

Its the only false positive I have seen so far. It not a problem. I would prefer a false positive every once in a while instead of missing something. As far as performance goes I havent noticed any lag but I havent tried to measure it either.

I switched from norton to kaspersky. I love it. I have an interesting story. After removing norton and installing kaspersky I did a full system scan. It said it found a virus in one of my ebooks. I am an IT consultant and I have a bunch of ebooks in .chm format on my pc on various topics from...

I have about 15 years experience building custom loudspeakers. You are correct. You can put a speaker out of phase by simply reversing the + and - wires. You can also put it out of phase electrically in the crossover but they most likeley did it in the wiring. Its worth a try.

I agree. Do a fresh install. Thats what I would do.

Hmmm picky huh? Well heres what ive got. I just bought a new power supply last week. I have heard that the dfi boards can be picky about power supplies. I got an ultra 550W. Not the xfinity. This is the new redesigned X2. The ram I am using is Corsair cas 2. I won these sticks of ram in a...

I am looking to build a system around a 165 opteron and want to squeeze as much as I can from it. Ive been building pcs and overclocking for about 10 years so I'm not a novice. Im considering taking the plunge with watercooling for the first time on this one. (danger den). I had my eye on the...

Monarch guy, my next born child will be named Monarch. After you. Thank you.

nice find.

Im trying to buy an opteron 165 to overclock it. All of the sites I have seen do not list the stepping number. Does anyone know of a retailer that lists the stepping of the chip your buying?

Im trying to buy an opteron 165 to overclock it. All of the sites I have seen do not list the stepping number. Does anyone know of a retailer that lists the stepping of the chip your buying?

Owning other flashlights is one of my favorite things to do. All ownage is accomplished in the first 10 seconds. Thats all that matters.

Yeah Sam goody in minneapolis is doing it too. It must be company wide.

I have the same issue. running a 7800 gs card.

I use stylexp from tgtsoft because you can configure it to work without using any additional resources: http://www.tgtsoft.com/prod_sxp_features.php I want my desktop to look nice but I don't want to sacrifice any speed.

its a 6800 gs co. I have worked with thier tech support. They want me to rma the card. I know another person with the same problem as well.

nobody has any ideas?

I just got a new evga co agp card. This is tha agp model that runs at 400 on the core. I seem to be getting atifacts and I have not aeven attempted to overclock or touch it in any way. I am wondering if anyone else had expierenced this. I was gonnna try turning up my agp voltage. (using an abit...