Search results

I had same issue where no devices were detected. Uninstalled via Revo, reinstalled twice. No dice. Within SBC settings there is an Application update specifically for "no devices detected". Updated and again no dice. Did a cold reboot and there it was! Good luck!

Sen 598 works for me.

With my XFX 7870 Double D, I reached a 1300mhz/1400mhz with a voltage of 1232 and the fan speed at 75%.

PM sent.

There's no possibility that the PSU is failing and not giving the card enough power when under load?

Well with EVGA precision x, I upped the voltage from 1050 to 1063mv, lowered the GPU clock from 797 to 615mhz, and lowered the memory clock from 1950 to 1500mhz and I get no error. What is causing this?

Im having issues with the "Nvidia OpenGL Error Code 7". My specs are: EVGA GTX560ti 448 core edition, G31MXK motherboard, 4gb Team Elite ram, Windows 7 Pro 32bit, Apevia 700w PSU. Everytime I try to play QuakeLive, it loads and plays for maybe a few seconds then my screen goes black, and comes...

I could do 5-5-5 but 15 is the highest itll go. Otherwise, what would be the culprit?

I have a CNPS9500 so it couldnt be heat, doesnt get over 40c under load. The ram voltage I dont think can be changed, but the ram i lowered to 533mhz and the timings are like 4-4-4-15. Ive upped the vcore of the cpu to like 1.5v and still does the same thing.

Before I list specs, yes I know my system is outdated but it suits my every need. Now, my specs are as followed: G31MXK with 2.0 Bios, Q6600 with G0 stepping, Team Elite 2x2gb DDR2 800mhz, 700W PSU, GTX560ti 448. Now my issue is that I am able to overclock to 3.08ghz with multiplier 343x9 and at...

PM sent

PM sent.

PM Sent

Recently purchased a HIS IceQ 5770. PC specs are as followed:Windows XP 32bit, D101GGC motherboard, celeron 3.33ghz, 2gb memory, 485w PSU (VERY outdated, waiting on my new motherboard etc). Problem is, the card works find as long as Catalyst Control Center isnt running. Once I open CCC, the...

Creative PlayCenter still.........

Thanks guys, I deleted those files and it didnt come up on startup. Hopefully it doesnt come back. Thanks again.

Yup. I recently moved from AVG to Avira, and the minute it installed, I had 5 popups, which were 2 trojans and 3 viruses picked up by avira, and all were music files. Thanks for the help too, Its a computer at work so ill let you know tomorrow. Thanks again.

Everytime I boot my computer, iexplore.exe is in the processes, and the memory usage keeps going up and up, and never stops. I scanned thoroughly with Malwarebites, Avira Antivirus and Combofix. It does not seem to go away. Here is the log of combofix: ComboFix 10-01-11.01 -...

Is the "Microsoft .NET Framework 3.5 Service Pack 1" update "necessary" for my XP Pro PC? Thanks...

I got some sheet on me system that I can't shake. Clock won't change from military time. Ran all kinds of scans, even in Safe Mode, nothing cleaning it up completely. Any suggestions? WinXP Pro SP3.........Appreciate any help.

I have been trying to burn CD's and at the end of burning it says it has failed. It seems that the recorder buffer level fluxuates up and down, from 99% to 6% back and forth. Here is the log for it. 6:37:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 209 Last possible write address on media...

Has anyone tried the Internet Security/Antivirus package "Blink Personal Edition"? http://www.eeye.com/html/products/blink/personal/

I recently purchased a new pentium 3 800mhz 100fsb slot 1 processor. Everytime I try to boot up, it will freeze. I will boot to safe mode, and it freezes. Is there something wrong with the processor? I have a 800 now working fine without problems on a slocket. Any ideas would be appreciated.

That is so confusing to me lol.

so with a normal slocket, your saying i could run a tualatin? any tualatin right?

I dont know, but my coppermine runs at about 1.63/1.65 here take a look.

I posted a question about a tualatin running at 1.6 volts and here is the thread: http://hardforum.com/showthread.php?t=1174536 one guy said this: Vmax for that CPU is 1.75v so 1.60/1.65v is fine. 1.45v standard -> 1.65v isn't too bad as far as overvolting goes.

I am just trying to see if I can put a tualatin in my 440bx mobo with a slocket.

well i have this heatsink WITH 2 of these side by side, and my p3 800mhz doesnt get hotter than 32 degrees celsius and 39 degrees celcius under load (unreal tournament 2004) (two 60mm fans that hang halfway off of the heatsink on both sides)

bump......anyone?

I have Tekram P6B40 with 440BX its about 9 years old and still running like a champ :D

p3 800mhz in a slocket running at 1064 :)

what would happen if I had a tualatin running with a voltage of 1.60/1.65 volts? would it burn if it up? and if i had great cooling would it be ok to run it at that voltage?

what would happen if I had a tualatin running with a voltage of 1.60/1.65 volts? would it burn if it up? and if i had great cooling would it be ok to run it at that voltage?

first mod, i need to finish painting and get a few more sticker sheets :D

i think someone does say it is for the microcode, and if it is, it will work on my p6b40?

the 7600GS is not as good as the 7600gt, the GS has 12 pixel pipelines, and the GT has 20. The more the better.

ive heard it wouldnt work without an update, but here is what ive read: http://www.motherboardpoint.com/t110612-tusl2c-and-p3s-14-ghz-big-booting-problems.html

In store $150 really wont get you anywhere, a 7300gt is $135 in bestbuy and $85 at geeks.com so you will be better off ordering one. here is a good card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150213

most likely i am going to purchase a powerleap adapter, BUT would my motherboard work with a pentium 3 server 1.4ghz cpu or just a celeron 1.4ghz since the p3 is a server processor. Im not sure if that p3-s will work because my asus tusl2-c (which is what i have on my other computer) has to have...