FSFT is NOT a discussion forum.
Your message (FS: MSI GeForce GTX 1050ti 4GB Low profile with Normal and LP bracket $OLD FML) breaks FSFT rules:
Read FSFT Rules! You have broken one of the FSFT rules that are spelled out and very specific. If you have gotten this warning, it means you broke...
I was trying to get half the CPU to work 100% but didn't understand what I was looking at until I slowed down and
50% of the CPU at 100% of the time was what I was trying for but wasn't paying attention to what I was saying 50% to. Its working perfect now:D
That was my only guess, on the ram slots not being used. No issues, but wasn't looking for problems either before I pulled it. its a friend's computer that I put together a couple years ago and I used it for a bit before he got it.
Took a little bit to get the cpu out of the socket, but never expected anything like this. Computer worked, so what the heck are those 4 burnt pins for?
Downloaded BOINC and its doing this to me. Folding seems to be down a bit but its too early to tell. Told it 50% cpu for the BOINC usage though but any % does it. Updated and downloaded the new AMD drivers so is this something else or is it new for windows 11?
HP J1493A 4 port KVM, 9 cables that are all alike, and then 4 that are made up of individual cables tied together. All free plus shipping/box. its outta here!
2-0-0 heatware. Its DDR3 and a 4th Gen I5...you can take the risk.
4x4GB DDR3 $20 plus however you want them shipped. Built a new PC for dad and this was the RAM he was running. Its desktop DDR CL 11-12 for the 3 2R sticks and the 1R is CL 11-11. Im not splitting them up for the money and...
Very short lived attempt. Unlike the video I watched where the brackets fit the other way (top and bottom), mine has no such luck. The capacitors are too close to the die to even make them work. I had planned on modifying something to make it fit but now I don't know. The EVGA cooler doesn't...
That explains why the spot that has a chip/ding in it is alright:) Thanks for the info, that puts my mind at ease. What grit should I sand the die before I install this AIO? Just kidding, im not a maniac, but I did pull the trigger on this $70 G12 + Cooler. If it works, I might go with a 240...
EVGA says its all good as is. This one was pretty easy to deal with on tear down. The screws are all the same, and just 2 loose nuts to deal with (omg). I am debating...delaying the inevitable modification of a G12 Kraken to bolt an AIO to it.
Its just a white spot in the 0 of GA104. The depth isn't something I can get with this phone camera and the ding in the heatsink was even worse to try and focus on. It could very well be no problem, but I know nothing about the make up of a die either. If I knew how much could be removed from...
It works within spec so I wasn't expecting anything to be wrong. With a modified fan curve, the thermals and undervolting were working out well enough that water cooling wasn't "for sure". I figured the new paste would help though and it dropped my fans another 100 RPM with the same curve. My...
Opened it up to put some Kryonaut on there and found a ding in the heatsink that put a chip in the die. Sent a message to EVGA already to see if I can RMA it, even though I waited 10 months to get it. Only took a week to break the seal cause "im gonna leave it alone".
Seems to be MSI Afterburner related or the settings I was using. I tried setting the curve based on -200 mhz and then raising the 900 mv to 1800 mhz based on what someone with a 3080 did. Thought it was all good until I started Folding. Decided to reinstall the EVGA X1 software and with it...
Its a lite hash rate version of the card but everything I read says it won't be hurt for folding. I can't think of any other reason this card keeps going from 2.5 mil points to 1.2 mil points randomly during the process. 160 watts to 60 watts. Am I missing something? Its in the middle of the...
Been an eventful day with the B450-F losing both NVME slots and killing my boot drive. After swapping boards back and forth, I got the firmware updated on the video card but it still wasn't getting to the bios or showing anything. Decided to press in on the video card pretty hard since its...
Its a refurb motherboard so it might just be junk, but it makes no sense to me either. The whole system works with a B450-F so everything else is proven. Put a 750ti in there and it boots up normal. 1070 gives no input to display. Any ideas before I return it?
Congratulations, you've earned a Gold badge for your contribution to Microbiome Immunity Project
Congratulations, you've earned a Ruby badge for your contribution to OpenPandemics - COVID-19
My galaxy S5 is burning up for that 567 points it managed to crap out today. ROFL but if it makes the last 3 digits 666 for that screen shot...BURN BABY BURN!
Got the bronze in smash childhood cancer;) Id post a pic but you guys know what it looks like. Never posted for the rest but ehh...don't get excited. Silver for Open Pandemics and Microbiome Immunity Project, and Gold in Mapping Cancer Markers.
I decided to update the drivers, and noticed my numbers were lower when I checked on progress. Kept them for a couple days and accounting for GTA, it never showed more than 1.2 mil. Put it back to the august 2020 drivers and its sitting at 1.5 mil on this task. Either coincidence, or the new...