I have RealTempGT run as administrator on Windows Startup. It was working fine until several months ago. I started getting this "Driver Error: Driver Not Found" every time the application tries to open. Any ideas what driver is needed?
Sorry for the delay in posting this. I was able to resolve my issue late last night and have been busy at work this morning.
Resolution: It seems that when I added the additional hard drives AND video card, it reset and dropped my pass-through configuration. I had to re-setup the pass-through...
I've had this server running Napp-It / OmniOS for several years now. I decided to add 2 more drives today and a new video card. After installing everything. I boot up my system to see the below. Spent the last several hours tinkering and really have no idea what happened. Please help...
Wow. It worked. Thank you so much.
I only ticked the 'Allow DNS server list to be overridden by DHCP/PPP on WAN' box back because my local DNS server wasn't working properly and the rest of the people in my house wanted internetz while I try to figure this DNS stuff out...LOL
Again...
pfSense - General Setup
DNS Manager
TCP/IPv4
Advanced TCP/IP Settings - IP Settings
Advanced TCP/IP Settings - DNS
Sorry for the dumb question, but where do I check for this?
I have 3 interfaces: LAN, WAN, and OPT1. Everything at the moment is connected to LAN.
So, would I just set up the...
Sorry, I didn't mean to offend you. I was confused when you suggested using WINS which, from my understanding, is the old way of doing things (even though it is still available and hasn't been decommissioned yet). I am trying to set up a DNS server on Win2K12 so that specific website(s) will...
I don't get the point of your post. Did you know that WINS is the name resolution system used for Windows NT Server 4.0 and earlier operating systems.
Is there any way to do this without moving DHCP to Windows Server 2012? The only reason I want to avoid this is if for any reason Windows...
It's for a home network. More like a test lab. I re-wired my house with CAT-6 and RG6 to a structured wiring panel. Now, just trying to use it for as much as possible.
OK. Done.
Not yet, I assumed that it would be the next step. I am using powershell directly from the Win2k12 server to...
I've been trying to for days following guides and videos through google search/YouTube and nothing seems to help me set up a DNS server properly. Please help.
My current setup:
ISP --> pfsense (router, DHCP, and firewall) --> 24-port managed switch --> 2X Wireless AP's
ESXi 5.0 with 3 VM's...
After having my server for about 6 months now, I am at a dilemma on memory configurations. I currently have an 8GB stick of 1333 ECC memory and wanting to upgrade to 32GB. Should I continue to buy the 8GB 1333 ECC sticks at a premium price of about $95/stick or go with the 1600 ECC memory...
w00t w00t! I finally figured it out. I was able to build raid-10 through Napp-It by first building a mirror pool. Then, I 'extended' the pool with a 2nd mirror, which allowed the raid-10 equivalent.
When I finally realized what everyone was posting earlier, after I watched the video, it...
Wow. ZFS Ninja. ROFLMAO! Watching it now. Thanks for referencing this.
It's good for a newbie like me so I stop asking redundant questions regarding redundancy...:D
This makes so much more sense now. I would just create 1 pool with all 4 drives using "mirror" and it should automatically create the Raid 10 equivalent. Sorry if I made this more complicated than it really is. I will definitely try this tonight when I get home from work.
Thanks again for...
I'm not sure I understand. From my understanding, raid10 is raid0 (raidz) of 2 pools of raid1 (mirror). Let me know if I'm off-base somewhere.
How would I go about setting up raid10 in Napp-It / OmniOS? I have deleted all of my pools and ready to rebuild the array as instructed.
I finally got the raid controller card (flashed to IT mode) and OmniOS/Napp-It installed. Thanks for the link to the guide. It was a bit confusing at first, but eventually figured it out. :D
Here is where I'm stuck:
- How do I go about setting up RAID-10? I've tried creating 2 mirror...
As I'm reading some information about the M1015 on servethehome, they mentioned that the M5014 can be had for $130 (obviously that's the deal at the time), but if I can find it for about the same price, would it be wise to pick that up for about $30 more or would you suggest to just stay with...
OK, so let me make sure I understand this correctly:
I would basically be using the SSD for ESXi. Then, within ESXi, I would create a VM (on the same SSD) with ZFS. From there, I would tell ESXi to pass through the controller to the ZFS VM. Then, create the RAID array from within the ZFS VM...
I guess when I didn't see a PCI bracket, I assumed it was meant for a Dell specific server for use in a storage slot or something. Also, on the H700 card, I didn't see a SAS/SATA expander connection on the board (Sorry for the lack of knowledge in this area) so I was a bit skeptical from...
As the title states, I'm looking for recommendations for a ESXi 5.1 compatible RAID controller card. My budget is $200 or less, preferably closer to $100 if possible. My brother recommended this H700 on eBay, but it looks like it is meant for a Dell-specific server and not the PCIe version. I...
Thanks. Will definitely try this out tonight.
Had something weird happen to me last night. I get home from work and turn on my server, I get 5 beeps (supposedly means bad memory) and won't boot ESXi. I was unable to IPMI remotely into the server so I had to setup a monitor and keyboard to...
I disabled the LAN Option ROM for both network adapters in the BIOS and was able to install ESXi last night. w00t w00t! That's about as far as I could get last night. Will keep everyone posted. Next step: Installing Windows Server 2012. Would 100GB partition on the SSD be plenty for Server...
I'm not sure what I'm doing wrong here. I keep getting an error on both "creating a new image profile" or "cloning an existing image profile" step. Here is the error message I am getting:
New-EsxImageProfile : Cannot conver 'System.String' to the type...
This is my first ever server build. Here are the specs:
Mobo: SuperMicro X10SLM-F-O (1150)
CPU: Intel Xeon e3-1240v3
RAM: 8GB 1600 Kingston ECC Unbuffered
HDD: 250GB Samsung 840 SSD
PSU: 430W Corsair CX430
So, here's my problem. After much research, it seemed like installing...
I have the funds to buy now. Just waiting on good prices/sales before buying.
It's a non-name brand case. 4U case with 2 internal 2.5 HDD and 3 external 5.25 drive bays. I plan on buying a 4-5 hotswap HDD cage to replace the 3-5.25 ext drives.
This will be my first server build ever. I will be using this mainly as a file server w/in my home network, but want enough power to add in additional things such as gaming and communications server, virtualization, website hosting, etc. I have been doing research for several months now and...
I was spring cleaning my computer area and decided it was time to part with some of these things. Plus, my wife is tired of me hoarding components. :D If you need pictures, let me know and I'll post them.
Prefer locals to DFW, but willing to ship if you will pay for the shipping. I prefer...
Geez...
I think the police responded accordingly. It's the person who alerted the authorities at fault here. I would rather them come fully prepared vs showing up to check out the situation first.
To all the naysayers out there, if the opposite were true, you'd still be complaining about...