Search results

I installed a simple ping app on my tablet. When I have my table plugged into port 4 I can successfully ping the tablet's (192.168.0.106) default gateway (192.168.0.1 on port 4 of Linksys) as well as the Linksys itself on 10.0.0.X. but I CAN'T ping my PC on 10.0.0.XX. Is this enough on it's own...

So far I've made port 4 part of VLAN2 via the GUI and assigned it a new IP (192.168.0.1) and enabled a 2nd DHCP for it. So at this point I can connect my tablet (via a USB-Ethernet adapter) to port 4 and it gets an IP address of 192.168.0.106. I have internet access on the tablet. I can also...

I was going to follow the post step by step because I don't really know what I'm doing. Further in that thread there's a guy saying that quote "The last line in your modded iptables enables access into the router from the wan... so people out on the Internet could potentially logon, and you...

If you do a search for screenwise panel on Google, they're the first 2 search results, at least for me. I don't know why they're both redirecting to google.com, I get two different sites both about panelwise.

I'm not sure. I never signed up for anything, it was completely random. There is a less complicated version that involves using Chrome and a plug-in but the pay is a lot less so I've read. This is Google's page on the study: http://www.google.com/landing/screenwisepanel/ This is the one that...

Would doing the following get me what I need? http://www.dd-wrt.com/phpBB2/viewtopic.php?t=1160 Copy and pasted: "What I was looking to do is separate Port 4 of my router into a separate VLAN that can access the internet, but not access anything on ports 1-3, or the wireless. However, I want to...

I do have DD-WRT installed on my WRT54G. So how do I segregate my network for this even better?

I'm trying to build a new PC but would like to offset the cost of a new one by selling my old PC. I thought I'd list it in the FS sub-forum but I don't think I'm allowed to ask for value of items there. So... any idea what I might be able to list it for on Craigslist or say here? Just selling...

+1 I bought a Thrive about 3-4 months ago and love it. Replaceable battery, full size HDMI and USB, SD slot, dock connector for dock with 2 USB and HDMI out. You can plug in hard drives, flash drives, RJ45-to-USB adapter for ethernet instead of WiFi, game pads, and apparently even CD-ROM drives...

So, not sure if anyone is familiar with a research program Google is doing, but the short is that they will pay you $120 up front and $30/month if you install a Cisco router that will report your internet activity to Google as part of a large research program. I figure I already use Google...

I wasn't insisting on using CAT6, just asking the opinion of if I already have to run network cable, do I continue using CAT5e, run new CAT6 resulting in a mix of 5e and 6 in the house, or just re-run all CAT6 if I already have to run cable anyway. Yeah, the already-run CAT5e is just run...

Went and looked at the house again today during inspection. The phone lines he ran are CAT5. Now I just gotta run network for all the cable locations. Gonna be a lot easier than I thought. Do I run new CAT6 everywhere? Do I run CAT6 to the new locations only? Or do I stick with CAT5 on the new...

Shoot... didn't think about that one. :rolleyes: Guess we'll find out. If I have to run new cables, no big deal. Try running cables from basement to 2nd story in an 1888 farm house with multiple additions... my new house will be like shooting fish in a barrel... :D I'll look into the Leviton...

Sorry to dig up an old thread... but I've got a similar situation. Buying my first home in the next few days (waiting for that closing date!) and am already planning my home network needs. The house has CATV and phone lines already run. I don't know who uses landlines anymore, but meh. I figure...

I tried those setting, and it failed miserably. At 1.45 it didn't even boot, and at 1.475 it got to the windows XP loading GUI, then crashed. I even had a +0.1 on my FSB, MCH, and DDR2... i ran a memtest 10+ hours last night, no errors in those results either. I'm thinking more and more that...

well, i finished doing the Blend test, it had no issues. So now i'm not sure what else to test. Am i finally out of luck on this one?

My memory configuration is 2x2GB. The specs on the RAM simply say 1.8-1.9, so even at 2.0, im above their limit. and its timing states 5-5-5-15. I'm currently running a Blend Test in Prime95 at 2.0GHz(6x333) with a 2.4 RAM multiplier to get to 800MHz at 4-4-4-12 at 2.0V. On another forum someone...

no no, at its stock 2.66 it'll run Prime95 fine. I kinda wish it didn't, then i could get another one and say this one's defective. I'm wondering more and more if its my RAM. When i bought all my stuff, i think i went for quantity over quality. Will unstable RAM effect Prime95's small FFt test...

well, i ran a test at 3.2GHz (8x400) at 1.35Vcore, all other voltages normal and the computer rebooted at the windows loading GUI. Then I bumped it up to 1.375 and it booted. here are the results.... Booted up, before test. Notice the Voltage in CPU-Z (its 1.375 in BIOS) as well as the temps...

I'll go ahead and give my Vcore a small bump up from normal, but i'm 100% sure it won't work cause i've tried it many many times, haha. i'll post up a screen shot as well. Thanks for the support! I'm really committed to solving my OC issues, whether i got a bum chip or there are issues...

hello all! i just did some playing around with not a lot of luck. I haven't fine tuned it, but i was able to do Prime95 for a half our with these specs: 3.2GHz (8x400) Vcore at 1.45 +.01 on DDR2,MCH, and FSB and ram running 5-5-5-15 at 800MHz Max Temp = 71 (kinda made me nervous...

thanks crunch. i'll keep that in mind. I'm probably going to get a NB fan for that hot HS to help with temps. I guess my only options are to: 1. start increasing NB/FSB and others voltages up along with small amounts of vcore until im stable. 2. be happy with 3.0GHz Would most of you agree that...

well, I just spent a while doing tests..... basically, im still left scratching my head. There's a lot of notes i took. take a look.... Results At 3.04GHz on normal vcore, i got a 33% PRIME95 fail rate. Any speed higher resulted in an almost immediate fail. At 3.2GHz(normal vcore) i couldn't...

I re-ran memtest86 using the 2.0 ratio, and no errors this time. so the specs are: 3.0GHz (8x375) 2.0 ratio (750MHz, 50 under stock 800MHz) Auto timings (5-5-5-14) core voltage = 1.35 all other voltages auto/stock pci-e at 100MHz and the performance enhance set to default picture so now that...

I ran a memtest86 using a cd iso and booting from it. I let it run all day while i was at class. when i came back, it was still running. i dunno if it was still going or had started the test again. regardless, i see it has some errors. I don't really know what the results mean but here's a...

crunch, i have NOT increased mch,fsb,pci-e and etc all to +0.1. I'm afraid of heat. I also had someone on another forum tell me his board fried after +0.2... makes me nervous. My temps are fine. using core temp 0.97 my idles are 35/37 and never been above 60 running Prime 95. My last stable...

before anyone directs me to read the sticky how-to... i already have. multiple times. Please don't point me there. I'm new to overclocking and this is my first desktop (had a dell laptop before.) I got the E6750 cause i read all these reviews about getting to 3.3GHz with no problems at all...