I'm coming from an LG 42LE5350 for my PC display (via hdmi, input labeled as PC, with true motion off) and was wondering if anyone had any experience with the new LG xx6900 series using it as a PC display. Given the specs, how would it perform with text and PC gaming? I'm assuming I could...
Awesome just bought the corsair psu and ssd you recommended. So how am I looking with the HD 5850? Is it still a good card? Should I keep it until fall when the prices drop a little more on the 7950's? Oh and how does this SSD connect to the mobo? Just using sata?
Actually I HAVE considered an ssd but I don't know much about them or which one offers best bang for the buck. I just install it , Install windows to the SSD and put everything else (games etc) on the normal Hard drive right?
Actually I haven't bought the PSU or HD yet, those are the type of parts that I'm looking at to put in my new build though. What would you recommend? I do have the mobo, cpu, and ram though.I play on a 42" LG LED at 1920X1080.
Awesome thanks for the help. I have the HK 335 on the hook to buy tomorrow. What guage wire and jacks would you recommend to hook up my Monitor 40's to the HK 335? I can use Amazon as I buy there alot.
Oh I see. Yes I have an AMD 5850 graphics card. I'm eyeing these receivers right now. http://bakersfield.craigslist.org/ele/2366091088.html Since I'm only running two speakers then I'm not worried about HDMI. Will these do?
Im running it through an rca like jack from the receiver to my motherboard. I would like to keep it below $250. Looking for used equipment here. Something like the Yamaha I currently have at least but with hdmi inputs/outputs.
I have a GIGABYTE GA-770TA-UD3 AM3 AMD 770 Motherboard. I'm running audio through my Yamaha RX V-620, Polk Audio sub and I just bought some Polk audio monitor 40 series II's that I haven't hooked up yet. Every time I turn my volume up past a certain level I hear constant static through my...
Just bought some Polk Audio Monitor40 Series II for a 2.1 for my desktop PC.http://www.newegg.com/Product/Product.aspx?Item=N82E16882290202 I see in some posts that some of you place your speakers on foam pads. Where can I buy foam isolation pads for these particular speakers or get the proper...
Awesome, did you buy it at Costco? I don't recommend that anyone buy it online since you will then be playing the panel lottery which is a pain. As far as using a 42 inch as my PC monitor I did it for years on my 42 inch Westinghouse and there wasn't any "head turning" I just had to scan a...
Okay well I own the LG 37LE5300 and I use it as a PC monitor display and text looked okay on it until I came across a thread that stated that I label the HDMI input that I was using to "PC" and now it's even better. Text is just fine and perfectly readable on this display when using HDMI and...
Here's my setup. Just bought this LG 37LE5300 LED HDTV to replace my older 42 inch westinghouse LCD, but I struck out in the panel lottery and got a VA panel so its going back. I'm going to get a 42LE5350 (same as the LE5400, just no wifi) instead and it will be a guaranteed IPS since I will be...
Does anyone have any experience or info on the LG 42LE5350? Saw them on sale at Costco and they were all IPS panels judging by the W in the serial number. How do these compare for use as a PC display?
I want a 37 inch because I have been using a 42 inch for a couple of years now and I dont want to go down in size very much especially for gaming and movie watching. Text and better document viewing is not that important to me. I sit 3 to 4 feet away. Text on the 42 inch Westinghouse I use...
Hmm, ok well that's not so bad seeing as the 60 hz Westinghouse I've been using hasn't bothered me at all as far as framerate is concerned. Anything else? Any other 37 inch LED hdtvs you could recommend or does that one seem ok for my needs?
So my main computer monitor for the last few years has been a 42" 1080p 60 hz Westinghouse and has been pretty good for me so far but its showing its age. Time to kick it down to one of my sons for his 360. I would like to buy a new IPS 37" 1080p LED 120 hz to use with my pc, but I would like to...
Yes I have the latest bios which according to Gigabyte are bios version F3. I have already updated the bios yesterday. Hmm 1.66 volts? Kinda scared to over volt the ram like that. Is it safe? If it is safe should I put the ram back to 1600Mhz at 1.66 volts? Oh and I still have the cpu overvolted...
Okay I downclocked the ram to 1066mhz at 1.600 volts in unganged mode and it seems to be running fine. Ran prime 95 for 15 minutes for a quick blend test and it reported no errors. Used memtest86 tool to make a bootable usb stick and it still wont boot memtest so I dont know whats up with that...
Okay I found the gigabyte memory support list. I dont even think this corsair xms3 1600 ram is on there is it? Would you please look at the list and recommend what i should get? http://www.gigabyte.com.tw/products/product-page.aspx?pid=3272&dl=1#memory%20support%20list
Thanks Danny but as I stated earlier "Ram specs say it should run at 1.65v but I can only go up in multiples of two on this board so the max setting before going over is 1.640 the setting after that is 1.660"
Ya your right it might be the ram. Hmm I took one stick out and it booted fine but froze on prime 95. took that stick out and booted just fine but also froze in prime 95. I then moved both sticks from ddr3_1 and ddr_2 slots and moved them to ddr3-3 and ddr_4 slots and its still the same thing...
Okay its getting better but still not there. When I use to run Prime95 and start test in blend mode it would freeze instantly. Now it actually runs for 5 minutes then freezes. Also When I try to install Dirt 2 it would only go for 2 minutes then freeze. Now it installs half way then freezes. I...
Ya I was thinking about getting him an iphone off of craigslist and his plan already has unlimited texting and data blocked so he should be fine. He will then only connect to download apps and such using wifi when he is at home or near a wifi hotspot. We shall see...
My son has an upgrade to an iphone 3gs coming up. He currently has a Blackjack II. When I bought him the Blackjack II i was able to get At&t to block data on it. If I buy him the iphone ( I understand that I have to agree to a data plan at signup) can I then cancel the data plan a month later?
Yep I bought mine brand new back in the day from Circuit City! Upgraded and put it away. It still looks new! I just figured it would be a better setup than the Logitechs. Think Im gonna go for the Polk Audio monitor 30's. Only $122 at Amazon.
My knowledge of audio is fairly low so please bear with me! I bought a Yamaha RX V-620 and a Polk Audio PSW350 powered subwoofer years back and after a while tucked it all up away in my closet. Both are still in excellent, next to new condition. I'm now building a new PC and was wondering if...
Hey Danny Bui it's you . My you're everywhere. You helped me piece together my new gaming rig last week in the General Hardware forum heh heh. Thanks! Okay back on topic....hmm $200? Not worth it, I will just leave it hooked up to an external monitor and let my kids play on it!