Try playing with the -d flags for smartmontools, maybe you can force it into SAT mode, or try forcing an ATA command (hoping the JBOD has passthrough of those), that may net you more information.
SATA 3.2: http://www.knowledgetek.com/graphicsNew/SerialATA_Revision_3_2_Gold%28with%20Links%29.pdf
SPL-2: ANSI INCITS 505-2013, haven't found this one free
SPL-3: http://www.t10.org/cgi-bin/ac.pl?t=f&f=spl3r07.pdf
SAS-3: http://www.t10.org/cgi-bin/ac.pl?t=f&f=sas3r02a.pdf
I'm sure I've...
It also depends on if you're powering your disks from a backplane or not.
All standard SATA power connectors (from your PSU) will ground pin 11. This will more or less make sure they DON'T stagger.
Most backplanes will leave Pin 11 floating or high, which will indicate to the drive that it...
There are a lot of "vendor specific" comments in the SATA specification with regards to activity lights and staggered spin-up. If I'm reading it correctly it can either support staggered spin-up OR activity indication, however that doesn't make much sense and I doubt anyone follows that...
They mean Pin 11 on the SATA POWER connector, not the DATA connector.
Pin 11 is an interesting pin. It is commonly used to manage staggered spin-up of drives in backplanes. (Not all though, some drives support it by commands only, and some don't support it at all).
If pin 11 is high or...
Ah, I just realized that its an LSI 9220-8i flashed to IT firmware, although it should effectively be an IBM m1015? Maybe there are minor differences?
It is also attached to an HP port expander.
mpslsi0: <LSI SAS2008> port 0x6000-0x60ff mem 0xd2600000-0xd2603fff,0xd2640000-0xd267ffff irq 16 at...
I run FreeBSD and use this script i found somewhere as a daemon: http://pastebin.com/AwAiTK2P
It basically forces a spindown using camcontrol after X minutes.
Works for me, but I had to make sure any "status reporting" script that uses smartctl uses the "-n standby" flag in order not to wake...
Hi
Trying to flash my IBM M1015.. unfortunately my motherboard requires me to use the EFI version of the flash utility.
Tried to download it from LSI... zip file downloads fine, but the efi flash utility is replaced by a text file saying this:
FILE QUARANTINED
Microsoft Forefront...
I got a CTM-1042SAS (4x 2.5" in a 5.25" slot) and stuck it to the left side and bottom of the case (inside) next to my mobo, with doublesided tape. Its not going anywhere.
Mounted it 2cm from the rear end of the case so I can still plug in the SATA cables and I can access the hotswap trays...
Have an ARC-1280ML... need some new drives, but unfortunately the Hitachi 5K3000's are out the question... they're either not available or twice as expensive as anything else here in Sweden.
Usage is media storage and RAID-5 or RAID-6.
Have these choices:
WD Caviar Green 2TB - WD20EARX
Seagate...
That could work... the AC connection is a bit dangerous though.. totally exposed screws :(
The other external thing only has 2A on 5v and 12v (either combined or separate, don't know), which isn't enough..
Yeah, I have them on 1.2 sec staggered spinup.
But as I said, "full load" power usage isnt specified in the HD datasheets, and the server has blown 3 PSU's so far due to them running very close or above max capacity :)
As for the external things... anyone have a specification on them? Need...
Holy crap, those server PSU's are expensive :D
The external 12v/5v thing looks like it'd work.. just have to find it somewhere around Europe, at least I know that they exist now (never seen one here), thanks for the help =)
Yeah... so I've noticed.
Limited space in the case (Norco 4224).. so no room for second PSU unless i attach it to the outside of the case, lol.
External 5v source? Would that be safe?
What about dedicated server PSUs? Any recommendations there? Although they sound like banshees from hell...
Looking for a powersupply for my file server, should be able to support ~30 HDD's.
Whats up with all the powersupplies these days having absolute crap 5v rails? Seasonics 1KW PSU has 25A on the 5v rail.. Corsair aren't much better at 30 A and the list goes on...
A new 2tb HDD draws 1.2A on...
As the topic heading says.
I'm trying to find a reasonably priced server MB with IPMI that takes one of the new (cheap) core i7 CPU's using socket 1155, that has the new AES instruction set.
I've found the SuperMicro X9SCA-F ... but it says it only supports up to i3, and I don't understand...
Same... Activity LED's need a magnifying glass to be seen. Its the model with 5 backplanes, SAS connectors (so 20 connectors in total, not 40).
Bloody annoying.
Thanks for the info.
Is the distance between sockets standardized? Seems to be a pretty close fit using the standard heatsinks.. not even sure that 2x thermalright hr-01x will fit?
Now I just need to figure out if its worth it...
So its cheaper because its a newer part, with a more efficient manufacturing process...
Do you think I'll notice any improvement going from Q6600 to 2x E5410 when it comes to compiling and such?
Whats the noise level of your average stock Xeon HSF? I've noticed that there are exactly 0...
Hello
Thinking about building a 2x quad core xeon system, but I am a bit confused about the different xeon models...
The server is primarily going to be used as a file server (ARC-1280ML + ARC-1220) and while developing .NET applications (VS2008, MS SQL Server).
This is the current list...
Yeah, I know its coming off the SATA cable, which is why I was confused.
I double checked... in a totally dark room I could barely make them out, and that was with 10 disks working constantly.
Those are some really really shitty LED's. Bit weird, since the green ones are fine.
I wish mine...
Did your rev.2 case include the rightmost thin mounting brackets in this photo?
http://www.norcotek.com/product_images/flyer/rpc4020_8.jpg
Mine didn't :/
Nah, I am in love with hardware raid 5 & 6.
I'll either use a Dremel, buy longer internal cables or sell case #2 and buy higher density hdd's.
Thanks for all the suggestions though, good to learn about some higher end stuff, since I have exactly 0 exposure to it normally :(
Yes and no, I'm not convinced it'd work. If I understood this correctly, I'd need 3 of those in the server, then I'd need 6 horribly expensive cables, and then I'd need 3 more brackets that are device based, not host based like that one, and then a bunch of sata cables..
Also found
http://fwdepot.com/thestore/product_info.php/products_id/1187 and http://fwdepot.com/thestore/product_info.php/products_id/1186
But a single infiniband cable costs ... $80.
I think this will have to wait until I win the lottery... or sell my car, or accidentally tear the ML...
Those seem like a better idea...
The one with 2 connectors, it says host end, do I need to worry about that or do I just buy like... 6 of them and slap 3 in the actual server and 3 in the extra case?
Okay, so for 20 drives I'd need.
2x 4-Port SFF-8088 to SFF-8087 Adapter
2x 1-Port SFF-8088 to SFF-8087 Adapter
5x SFF-8087 to SFF-8087 miniSAS cable from ARC-1280ML to BRACKET
5x External MiniSAS Cable SFF-8088 to SFF-8088 that go between BRACKET and BRACKET
5x of my existing ML cables...