These are just my opinions (coming off Nec LCD 3090WQXi professionally calibrated).
If you are serious about photo editing, you will:
- control the color temp of your room lighting
- get a monitor hood
- matte (or at worst, semi-matte) displays only. You understand this after few hundred...
Never say never:
120Hz VA panels en route for 2012
http://pcmonitors.org/others/120hz-va-panels-en-route-for-2012
http://www.tftcentral.co.uk/articles/monitor_panel_parts.htm
AUO AMVA M270HW02 V2 1920x1080 12ms 5000:1 400 178/178 16.7M 72% W-LED 120Hz
Model info for IPS236V
http://ca.finance.yahoo.com/news/LGs-New-Super-LED-Line-Raises-prnews-1660202999.html?x=0
Price in Japan c. 220EUR
http://www.pc-koubou.jp/goods/campaign.php?pc=50&vp=0&pp=&m=&mk=&sp1=&dl=&nw=&rc=&nk=&c=&c1=&c2=&dl=&mn=&gn=&price=&cn=&ln=&etc=&color=&sort=nm&s=&ak=
Looking for a display that would be ideal for watching 24P original source material.
Requirements:
- 1920x1080 material
- good viewing angles, good color (IPS preferred, VA possible, TN out of the question)
- capable of inputting and 24P film material from a HDMI/DisplayPort source
-...
I've been waiting for a decent slate for ages, but HP is not that.
My reasons:
1. Glossy screen is an utter fail for reading anything for longer durations. Yes, I could alleviate that with a new matte screen protector.
2. Screen resolution is way too low. 1366x768 should be the bare...
Did you ever get this fixed?
I have the same board, but can only get resolutions up to 1600x1200 out from any output (HDMI, DVI, VGA).
And yes, my display is 2560x1600 and the cable is dual link capable (all pins there) and tested with GTS8800.
I've tried uninstalling and re-installing...
Eh, was too tired. meant to write 120Hz.
Good to know that Samsung rep has at least mentioned there's something in the works.
I think I'll just skip the 22" 1680x1050 120Hz generation in wait for the 1920 panels.
I've been looking at the 22" 1680x1050 100Hz TFTs, but that form factor and resolution is bit too little for me.
So, those of you who follow the panel scene - has there been any talk about doing a 24" 1920x1200 @ 100Hz for gaming and 3D use? I believe this might still be within the specs of...
Logitech Illuminated is supposed to be decently quiet. More so than Logitech UltraX flat, according to some reports. Both are 'laptop' type keyboards.
You could also venture into silentpcreview.com forums. Those ppl are serious about quietness.
I've been looking for a similar keyboard myself...
Perhaps, but their recent 23" and 30" are getting quite bad rap in the forums:
http://discussions.apple.com/thread.jspa?messageID=6991614�
They've changed 'something' in their manufacturing line and the results speak for themselves.
I'm not sure either, but at least the usually accurate Prad.De is reporting H-IPS for LCD3090WQXi:
http://www.prad.de/new/news/shownews_tft1429.html
I'm almost ready to order one, but will wait till somebody gives 1st impressions and measures one unit.
Proper scaling => lots of additional processing delay (i.e. "input lag").
If you value low processing delay, get the HP or 3007 Dell.
If you value IMG quality, get the new Nec (or Eizo).
If you value a compromise, get the new Dell.
IMHO, YMMV, etc.
A few were: Nec RDF225WG comes to mind now. Possibly one Quatographic or Barco, can't find data now. They were rare/expensive though.
Yes, in print design a larger color gamut (approx. ISO coated for example) can be beneficial if used properly.
OS X uses normal graphic card LUT changing...
This has been covered before.
Think about it.
If the display of counter is delayed, which one has a higher number?
The display that delays or the one that doesn't?
Well, now that US is going into recession, maybe they can't sell so many of them there for much longer.
Maybe then they'll give it to us Europeans too? Hope springs eternal.
I also doubt will see OLED or other 'new' display tech in mass market availability / pricing this year. In fact, I believe the same goes for any higher actual refresh rates, mainly due to display interface/signaling standards.
The 'big' thing might be the coming down of 22" - 24" prices in...
I do not think tearing is a function of the display, but a function of output framerate (fps), display internal refresh rate (always 60Hz for TFTs) and use of vertical sync feature.
For gaming, consider also:
http://www.hardforum.com/showthread.php?t=1254304&highlight=strict
and...
LG L227WT (LG Philips Panel, 2ms, 5.5ms T_fall+T_rise/b&w) was measured by a user @ prad forums: input lag seems to be c. 0-8ms, so on par with Samsung 226BW (with S panel). So not quite zero lag, but quite close.
Post calib results (select "Rendu des couleurs après calibration" from the "Etape 3" pop-up menu)
http://tinyurl.com/2mrunl
Ghosting (select "Renu jeu, au mieux / au pire")
Chimei CMW 222H 22" (TN, CMO)
http://www.prad.de/new/monitore/test/2007/test-chimei-cmv-222h-teil12.html#Reaktionsverhalten
Seems to be also in the category of near zero input lag according to prad, but Les Numeriques testing disagrees...
Are there any other TFT displays that have zero input lag (i.e. processing delay, not including lcd module reactivity speed), other than:
1. Iiyama ProLite E2201W 22" (TN, Samsung panel LTM220M2, lottery??)
http://www.lesnumeriques.com/article-312-2236-50.html
2. Acer P223W 22" (TN, panel...
Not hard to look at, but the reflections are there. They do bother me.
Now, before any of you say "it's all subjective", it's NOT.
There's about a ton of ergonomic literature on reflections and their effects on eye fatigue, focusing errors and task performance.
Reflections worsen performance...
~El~Jefe~,
does the Planar PX2611W suffer from purple inversion at varying viewing angles (this is a basic feature of IPS-panels, if they have no proper filters for compensation)?
Do remember:
Good scaling => higher input lag
Lower input lag => worse scaling
If you play FPS games, input lag may also be worth considering (or not).
Color accuracy: wouldn't notice any difference.
Reason: games do not work with profiles and do not work with natural colours, most use candy like cartoon colours. Accurate doesn't mean vibrant, sexy and full of life (over-candy colours that most games use)
Contrast ratio: perhaps, esp. if...
Maybe for you, maybe not for everybody.
I've been running 1920x1200 for quite some time without enough GPU horsepower to run native rez.
Proper scaling algorithms give an adequate image with an image deterioration that is almost an order of magnitude less than having the other type of image...
Thanks jonstatt1!
Is the default brightness (w/ colorcomp) extremely bright?
I wonder if I calibrate the display to default levels, will it lead to uniformity or colorcomp mismatch issues?
Answering myself from the other long 2690 thread:
2) Does your unit suffer from the audible noise issue (serial number)?
http://www.hardforum.com/showpost.php?p=1031319458&postcount=1122
3) Did you get it work with SpectraView II -software or similar sw to control the internal 12-bit LUT (if...
Thanks for the reply.
I hope somebody who has a bought a more recent unit will reply later.
The noise issue has been putting me off this display. I think the display can be internally calibrated using US Spectraview (separate $170 purchase in US) or via Gammacomp, although I'm unable to...
I think you'd have better chance of getting a response if you asked NEC UK or Nec Germany directly:
http://www.nec-display-solutions.co.uk/coremedia/generator/index,realm=Contact__Home,spec=x__uk__en...
Not available in Europe, as far as I know. Reason? I wish I knew.
Try contacting Nec UK or GER directly and asking them (if you get a reply, please post here):
http://www.nec-display-solutions.co.uk/coremedia/generator/index,realm=Contact__Home,spec=x__uk__en...
If you are or purchased an LCD2690WUXi from Europe, could you answer a couple of questions on your unit:
1) Where/when was it bought?
2) Does your unit suffer from the audible noise issue (serial number)?
3) Did you get it work with SpectraView II -software or similar sw to control the...
My current contestants are listed in the following thread:
http://www.hardforum.com/showthread.php?p=1031493986#post1031493986
I can't get a decent price in Europe for NEC 2490 or 2690, so I've excluded them (also the EURO version of 2690 had audible noise issues, which weren't covered by...