Search results

I almost exclusively use Seasonic OEM PSUs in my builds. I only had a single issue with them in years, and that was a loose cable due to vibration - fixed in about 5 minutes. There really is no reason to look for any other PSU but Seasonic. Quality is excellent, the price is right and they are...

Speeding HDD was a disappointment for me too... I've tried two WD15EADS 1.5T 5400rpm drives in both RAID 0 and 1 configs and the performance was simply BAD... the HDTach graph looked like a comb... dropping back to 15-20MBps too often... But the ICH10R controller is just fine, giving me...

Hi, I might be a lucky bastard, but I've managed to get this board to 212BCLK (the same you reached with completely different settings...) with only adjusting VIMC to 1.33V and Vcore to 1.3V to get 4.04GHz (19x212) stable (24h OCCT and 24h Prime95 x64 both running on all 8 threads - separate...

What exactly are you talking about? There are 5 internal and one external SATA ports.

Hi, I've built some (3) computers based on this MoBo recently. It seems strange to me that your Sandra memory tests were so LOW... I got roughly 13000 with UMA (256MB) )enabled and about 700MBps more with sideport only for the IGP. all this was achieved combined with a Phenom II X2 545...

R there no OCers with a liquid cooling on this forum? such a shame:confused:

I'm sorry mate! I apologise! Your results are fine, but they seem to be useless to me... It's a fact that P95 won't heat your CPU up as much as OCCT CPU test... Please DL OCCT and post your temps :) Please please please please :)

Guys/Gals Please don't post your temps with P95/Orthos as they are roughly 10C lower than with OCCT v. 2.0.0a CPU stress... Also please leave the test running for at least 30 minutes as larger amounts of cooling liquid take about that long to saturate with heat and stabilize in...

Is there noone willing to share? soo sad.

Hi, I'm just curious what temps you guys have under load... Should look something like this: Stock CPU : Q6600 G0 stock @ 1.21V (Load reading) Load temps after at least 30mins. OCCT v.2.0.0a CPU stress : 38-38-34-34C Idle temps : 29-29-24-24C Ambient temp : 22C OC CPU : Q6600 G0...

Four of them in RAID10 will do it for me :)

I understand that you don't care about anthing else but stable OCs! Who does, anyway [except those crazy enough to play with liquid/solid gases:eek:]? But you could at least describe what stages you went through, what settings you've tried and what was the situation throughout the testing...

I suppose I should be happy then with my Abit IX38QuadGT running a Q6600 @ 8x513 with 2GB of OCZ 800MHz DDR2 @ 1026MHz 5-4-5-13 2T getting the same ~8,5GBps mem bandwidth @ half the clock with less heat.... ...Till I'll desperately NEED 3 3870X2-s :D BTW: I understand you're time...

You're the boss :) You know. Z

Hmmm... what power rating is the S320-12? I assume it's 320W (12V ~25A max output?!?) now the 320W peltier is 12.7V, 36A OR! 24.1V, 19A that means the peltier NEEDS a 460W (12.7*36=457VA)!!! power supply!!!!! to run. As your Meanwell was forced running OVER the max of its specs because...

Try talking to jinu117 as he seems to be an EXPERT on this field :D Z

I am not an expert in this area but i think you could get load evaporator temps around zreo with this baby but not much less as it's rated up to 116W/h so core temps when loaded would be above zero for sure. Somebody correct me if I'm wrong :) Z

You are absolutely right! As I said before, it's overdimensed in all ways! The only reason I am doing this is that I'm fed up with upgrading all the time... This way I'll get a cooling I can keep for a respectable period of time. Of course it won't run @ full performance all the time! In fact...

What fridge is it? It probably won't be powerful enough to build a phase change... you have to use special refrigerants and huge compressors as standard fridges aren't built to keep a ~150W heat source at -50C! probably not even 0C. but you could use it as a waterchiller. The bigger the volume...

Hi, I understand, that many of you will say this is stupid and not cost effective but... I'm going to build a TEC cooled system. It doesnt matter what HW I have @ the moment as I'm building the cooling for whatever I buy after It's ready and tested to be safe for 24/7 (by the way thats...

I honestly think the power supply won't be enough to power anything else... Not even the 437W moster... as it's running only @ 342W!!! that's probably the reason why the paper temps are much lower than the real ones. Z