I did a bit of testing recently with the recently revived GTX275 Lighting and am happy to report I finally clinched the single W.R. after another bench session :)
The P67X-UD3R-B3 is a little cracker of a board. Z68 gear is around the corner and will now have the same "X" range (i.e. P67X)...
PLL Overvoltage and CPU PLL are two different options in the bios, first one still has to be enabled for max clocks and second one is interesting, some guys are reporting that they can also reduce vcore when they lower CPU PLL, others actually have to bump it up a touch, good to see it works for...
i am trying to tell you that not all CPUs will be like yours, 4.8 isnt where PLL helps all chips, some will need it enabled even at 4.6 is what i am saying to you, yours is clearly better than the bottom of the barrel CPUs heh :)
thats not true actually
it starts from about 4.5Ghz and those chips will max out at 4.8/4.9 depending on cooling
if you are stuck at windows logo thats your chip limit. i have a chip here which does 5.2 and no more and another one that does 4.9 and no more, if i try to boot at 5Ghz it just...
Kyle have you actually installed all the apps through the CD that came with the board?
EasyTune will not operate properly if the Intel Management Engine Interface driver is not loaded on the system.
CPU PLL Overvoltage has to be set to Enabled to be able to overclock past at higher...
you are not using any performance, in fact that is the best configuration to use anyways as slots 2 and 4 with a 2 stick kit overclock a bit better anyways
i run my setups with slots 2 & 4
http://www.youtube.com/watch?v=8ngyUrjuQ80
OK guys
i got a few bios updates for UD4/5/7 which should sort this S3 multi sleep mode
give it a crack
i tested UD7 and it works fine now, just enable S3 in bios
http://filefactory.com/file/b5167da/n/Desktop.zip
i tested UD7 just now with F7a with a combination of different OCs and it doesn't remember the multiplier after coming out of S3, I've reported it to PM to sort out. We'll fix it up :)
Did some more testing last night
it keeps getting better and better :D
First of all some bios screenshots if you havent had a chance to look at them. I only took shots of interesting things for overclockers
That last screenshot is interesting. Since i was...
STOCK TESTING ON AIR COOLING
with XMP Profile loaded to run RAM at stock
during load like superpi or hyperpi or prime the CPU was operating at 2833MHz
i will have to retest this 1M as the PP efficiency below 39K seems awefully good...it may be that 1M was actually still running at 22x...
G'day fellas
It's been a while since i visited Hard forum. Time for some new exciting and fresh silicone torture sessions to begin which i want to share with you fellas. :D
What's getting tortured......
Test Configuration:
Gigabyte X58-UD5 F2/F4E bios so far
Intel Core i7 920...