• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Zontar

  1. Z

    Help on diagnosing POST failure (P8P67 Pro)

    I'm using the CM Hyper 212+. Have kept a close eye on temps and was not overheating to my knowledge.
  2. Z

    Help on diagnosing POST failure (P8P67 Pro)

    New developments: I've disconnected everything but the main motherboard power from the PSU. When I disconnect the video cards and hard disks, the machine will get farther than the red CPU LED (all the way to throwing a video card error because I have none plugged in...expected behavior.) This...
  3. Z

    Help on diagnosing POST failure (P8P67 Pro)

    Last night, I went to bed and my computer suddenly shut down on its own. When I attempted to start it back up, the machine failed to boot, and the motherboard lit up the red CPU LED. I pulled all but one RAM module and the machine still doesn't POST. So, I'm thinking it's one of three...
  4. Z

    Windows Installation

    I have a P8P67 Pro and Windows 7 x64. The motherboard they are shipping me for an RMA is identical to the one I have currently. It's in RAID-0 setup as well. Am I going to need to reinstall Windows?
  5. Z

    Marvell Ports and Raid 0

    I have two 500GB drives in RAID 0 on existing intel ports. I recieved notice that the intel 3Gbps ports have been marked as defective and the recommended workaround is to connect any drives to the Marvell 6 Gbps ports. If I plug in the drives into the Marvell ports, will they continue to...
  6. Z

    Sandy Bridge P6X Chipset Shipments Halted.

    Well this is fantastic. I'm running RAID 0 on a P8P67 Pro. Am I going to have to re-install the whole damn OS and reformat?
  7. Z

    Overclocking w.4 RAM sticks

    I had a 4.2Ghz overclock on an i7-2600k the other day on four 4GB DDR3-1600 modules. I also had random lockups. I turned down the OC settings and let it run overnight. No problems so far. Is 4.2Ghz too much for four modules of RAM? Load temps were OK (about low 60s C.)
  8. Z

    Asus P8P67 Pro issue - Getting very close to returning it

    I have an identical problem...random freeze-ups on a P8P67 Pro machine. However, I'm still not entirely sure it is a motherboard issue. I'm running Windows Memory Diagnostic now, and will try to memtest86 each of my four 4GB g.skill ripjaws 1600 modules.
  9. Z

    New Build Freezing Intermittently

    Well, this is a rather frustrating problem. My new build is freezing randomly, probably about after seven hours or so of being on. I don't know how to replicate the freezing, it's completely random...and leaves nothing in the error log after I reset. So, where do I start here? RAM? CPU...
  10. Z

    Hyper 212+, 2600k, Low-mid 60s @ 4.0Ghz...reseat?

    Has to be the default, I only changed the multiplier to x40. I've got about two thick PSU wires before the CPU fan, but nothing I would imagine that is obstructing the airflow. They're well tucked away into the space below the 5.25" drives.
  11. Z

    Hyper 212+, 2600k, Low-mid 60s @ 4.0Ghz...reseat?

    I'm still not sure if I bungled the installation of the CPU cooler, but I'm getting low to mid 60s load (celsius) using Prime95 on a modest 4.0Ghz overclock. Is this expected, or should I reseat?
  12. Z

    What's the best case for me?

    If they're not bright, that's not too bad. The big things for me are room and airflow. I neglected to realize that cases came in different sizes (first time building.)
  13. Z

    What's the best case for me?

    I just realized both of my video cards will not fit in my existing Centurion 5. So, what is a good case with the following in mind? - Two HDDs - Two GTX 570s - A large cooler like the Hyper 212+ - NO LEDS. - Best airflow - Fair price What do you use?
  14. Z

    P8P67 Pro Enclosed SLI bridge?

    Is this little ribbon that looks like two x1 slots the SLI bridge or is this a CF bridge? Furthermore, I'm installing two GTX 570s, and there's two places for the bridge. Which one do I attach the bridge to?
  15. Z

    Coolermaster Hyper 212+

    Thinking of jumping ship from an N520 to a 212+. To everyone who's been getting good temps...how have you applied the TIM on a direct-heatpipe-contact cooler like this? Also, is a second 120mm fan really nessecary?
See more
Back
Top