Recent content by specialk12882

my RAM sticks are in the two blue slots as indicated by the motherboard manual. These are the two closest slots to the processor that work together in dual channel mode.

I have tried both the latest stable bios (1005) and the latest beta bios (1006.004). I have cleared the CMOS and removed the battery for both flashes and I flashed in a DOS environment using AWDFLASH.

Yes, I have 2x512 and the Asus A8N-SLI Premium

I've narrowed down the problem to the Command Rate. I cannot get this memory to run stable at a Command Rate of 1T. I have to lower it to 2T to get things to work right. Would this be a RAM problem, memory controller problem, or motherboard issue?

I've already done all that. Memtest86 runs no problems. I've let it run for 12+ hours w/o a single error. Prime95 doesn't start showing errors until about hour 12.

I'm building a new system AMD64 FX55 Asus A8N-SLI Premium 1gig G.Skill 1GBGH 2x eVGA 7800GTX SLI PCP&C 510 SLI 2x WD Raptor 74gig In the bios, the motherboard is setting the SPD timings to 2.5 - 3 - 3 - 5 2T even though using CPU-Z, the SPD settings are 2 - 2 - 2 - 5 1T. When I...

I have two WD 74 gig raptor drives. Which would be faster? Putting them into a RAID 0 array and making two logical drives, or leaving them as is and moving my pagefile to my nonsystem drive? I've heard good things about both.

My Mobo doesn't have a 2.5 option lol. 2.6 is as low as it goes

Already did that. I built my system last night, loaded windows, ran Memtest no problem, then ran Prime95. I was getting errors, so I turned off my system, changed some ram around, and turned it back on. But, it wouldn't post. I got a continous loop of short beeps (I still haven't been able...

Well, it looks like I was mistaken - failing Prime95 now. So, passes Memtest86, fails Prime95. Did I get a bunk processor?

Whenever I set my memory to stock 2 2 2 5 settings and up the voltage to default 2.75/2.8, I fail Prime95 in under 3 minutes. However, I can run Memtest86 all night long no problems. When I drop the voltage down to 2.6, I seem to have no more errors in Prime95. Why can I not up the voltage to...

lol, i could just cut the rubber stuff and use zip ties, but i'd prefer using regular flat ribbon cables.

Is this case wide enough to support a rear 120mm fan? It comes with an 80mm fan stock and I know the 7Plus series comes with a 120mm one stock, but I would like to have the option for vertical mounted hard drives and a removable motherboard tray. Thanks guys!

I'm trying to find some single device ATA 133 18" ribbon cables, but I cannot find them anywhere. I did a quick search of the forums but came up empty. If anybody knows where I can still find these relics (I want to hide them under my motherboard), please let me know. Thanks guys!

How did you find that card on newegg? I did a search and it doesn't show up. Also, if anybody could explain the difference between the RD and SR cards, I would be greatly appreciative. I don't want to shell out less money and then find out its an underclocked card in the future :-( Edit...