Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Update: The motherboard arrived and the service here asked me nicely if I could bring the PC to them. I was happy to, the motherboard was replaced and the PC is working. I am however afraid to put the GTX660 back again, so I am hoping I will have luck with the EVGA queue and buy a 3080 or 3090...
I opened a service ticket with Dell and despite all the hate against them, especially from Gamers Nexus's Steve, they have been super responsive and nice.
They answered quickly, alrealdy ordered a new motherboard for me and a technician will replace the motherboard at my house before 21st of...
It booted and worked with the old R5-230. I could not see the BIOS, was all white, but windows ran ok. I also tried an RX460 but the card overheated like hell and shut down after 5 minutes. I thougt the card was bad but now I am beginning to think you are right and the motherboard is bad. I will...
Hello.
I just blew a chip on my Alienware Aurora R12 with a GTX660 GPU.
I was under the impression that all PCI-E GPUs are compatible. I got an Alienware i5 10400f with no GPU at a good price, and I wanted to use it until I got a good GPU. So I put an old R5 230 gpu and it worked fine. Today I...
I found GPU cores on aliexpress. They are around 70$ so I think I might order one to play around with. I know it doesn't make sense financially speaking but the satisfaction of correctly identifying the problem and actually seeing the card alive again might be worth it. Or maybe I can find...
Of course I could't help myself and I removed the GPU. Easier than I thought, but the chip is small. Anyway, the short is gone. So I guess that was the problem.
I was thinking about Puhui T862++:
I don't plan on starting a business, just to develop a new skill, more like a hobby.
But I wouldn't mind spending a bit more if it really makes a difference in quality. Can you recommend something?
Well, not great news. I watched this video:
The GPU core has 1.8v in, and at 1:27:09 he says that when you find a short on 1.8v it's almost certainly a dead GPU core. And this is true for both cards.
I would have to remove the core to be sure but i don't have a reballing table to be able to...
Ok, so what I have found today.
I got hold of a schematic for similar boards and I found the GS7103. The problem is I can't figure out where it goes from pin 6. It says it's 1.8v but I don't know what 1.8v is used for.
I did a few google searches and someone said something about memory and BIOS...
Yes, I took the chip off again. The 0.2Ohm are from pad 6 to ground.
I saw on youtube that someone trying to repair a RX460 found a schematic for a MSI RX460. Maybe it has a similar layout, or at least find out what that chip is suposed to power. I never looked at an electronic circuit board...
I desoldered it and checked 3.3v pin to ground resistance and I still have 29Ohm. I plugged it in and started the PC and the short is gone. The problem is that the core gets hot pretty fast. I started the card with my finger on the GPU and in about 2 3 seconds it got pretty hot, so I turned it...
Here are the chips. The one on the shorted card is GS7133.
I suspect 3.3v because of the low resistance, especially compared to the working but different model RX460.
I may be completely wrong though :)
Hello everyone.
I want to say that I am a beginner in electronics repair but I have very good soldering skills and access to programmers ( Beeprog, Xprog, etc). I work in automotive repairs, mainly ECU-s where I have to swap different parts between them (cloning them) but no experience in...
Hi. I just fixed a card with the exact same problem. First card I ever fixed in my life. I was lucky that the mosfet was visibly blown so I knew immediately what the problem was. My question is, instead of replacing the same part number, can I install a uprated mosfet? I have no idea how to...