Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
I have finally settled in on a stable overclock. Here are my settings:
CPU Ratio: All Core
All Core: 44
CPU Cache Ratio:30
BCLK Frequency: 100
Load XMP Setting: XMP 2.0 Profile 1
CPU Vcore Voltage Mode: Override
CPU Vcore: 1.300
CPU Input Voltage: Fixed
Fixed Voltage: 1.900...
My strategy is to set the vcore to 1.3v override and step down from 4.5GHz by 100MHz until I find a combo that is stable. I'm down to 4.2GHz at 1.3v and it's still not stable.
I just upgraded my main system from Z77 with 3770k to X99 with 5820k. I've done a lot of reading about how to overclock the Haswell-E processors but I'm struggling to get a stable 4.5Ghz overclock using AIDA64 stability test.
Here are the details of my new system:
Motherboard: ASRock X99...
I have a 3770k overclocked to 4.5 GHz. The processor is being cooled with a ZALMAN LQ-320 Water Cooler with two (2) COUGAR CF-V12HPB fans in push/pull configuration. After running Prime95 for 24 hours the highest temperature measured by HWMonitor was 81 degrees C. During normal processor...
I am piecing together a new system which so far consists:
Fractal Design Arc Midi
Samsung 16GB (4 x 4GB) DDR3 1600
Crucial M4 2.5" 128GB SATA III SSD
Corsair TX Series 650W ATX 80 Plus Bronze
Intel Core i5 2500K 3.3GHz LGA 1155
I will be overclocking the Core i5 2500K to as far as I...
I'm looking to upgrade my wireless network to hopefully get more speed. I currently have two WRT54G routers flashed with DD-WRT, One is connected to the cable modem and the other serves as a wireless bridge for my TV, Blu-ray, HD DVD, and AVR. Any tips on a budget upgrade?
I just bought 4 yate loon 140mm fans and they have a three pin connector and a pass through molex. Are there an benefits to using the three pin connectors to the motherboard headers versus the molex? Thanks.
I recently bought a i5 2500k during the crazy Micro Center sale last week and now I need a motherboard to go with it. I want a stable motherboard that will overclock this processor well. I originally was set on the Gigabyte Z77X-UD5H but I noticed that newegg was running a sale on the ASRock Z77...