• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Prisma

  1. P

    need help, MSI P55 GD65 powers issues

    Make sure you put the memory in slots 2 and 4. This board will not post with memory only in the 1st and 3rd physical slots.
  2. P

    New A64 Build

    No good luck I guess. My current best overclock with this rig is: 260x9 = 2340mhz @ 1.5v Prime stable 40c 5/6 ratio = 216mhz 2.5-3-3-6 @ 2.6v HTT 3x 270x9 or 300x8 with a 2/3 divider both fail even with 1.65 Vcore. :mad:
  3. P

    Might be a hot deal for folks in Central Indiana

    Word is now they could open in as little as 2 weeks.
  4. P

    New A64 Build

    Putting together a new rig tomorrow. Got a 3000+ CBBID 05 03 EPDW via Newegg. I've never seen this stepping before, so i'm just crossing my fingers and hoping for a little luck. I got tired of waiting for a Neo2 and went with an Epox Board. I'll post back in a couple of days with results from...
  5. P

    Good $100 PSU's

    I just bought a 500W Blue Storm. First thing I noticed is that this things friggin heavy! The manual states the over-current protection is 3.3v = 80A 12v1 = 20A 12v2 = 20A tested with application of the listed over-current value with maximum load on all other outputs. It also states a short...
  6. P

    which laser printer to buy

    I don't have any experience with the HP, but I just recently bought a Samsung ML-1740 and I'm happy with it. The fan is a little noisy if you have it close by, but it turns off when the printer enters sleep mode (adjustable 5-60 minutes after printing). The HP is fanless, but i've heard the heat...
See more
Back
Top