I believe you misread, I will only have 2 M1015's as it's cheaper to have 2 of those than any other 16-ports controller. The cheap HBA is because my onboard controller isn't hardware raid, so I can't really pass that as a possible datastore. This is why I need a cheap HBA to just connect a SSD...
Hi there everyone!
Discovered ESXi last week, so basically been thinking about it every evening.. :confused:
I put together a list of parts that I would like to order, but I do want a final checkup from you guys before spending any money on it. ;)
Parts list...
Good to hear that the OCZ SSD's should not be used, I picked a second m4 one!
The 64GB version of the Samsung 840 pro seemed not available everywhere..
As for the case, I tried to pick a short(er) chasses so it would fit in my cabinet. I'm going to hang the cabinet on the wall, so the...
I chose the SuperMicro board and an Intel Core i3 3220 Boxed. Thanks for the info!
So, any comments/suggestions on my component list?
Edit: NAS a lot more powerfull than a QNAP TS-870U-RP and still cheaper, yay! :D
Greetings
I was thinking about this motherboard: http://www.amazon.com/SUPERMICRO-MBD-X9SCM-F-O-Intel-Server-Motherboard/dp/B004WKRDA4/ref=sr_1_fkmr0_2?s=electronics&ie=UTF8&qid=1370244110&sr=1-2-fkmr0&keywords=SUPERMICRO+MBD-X10SL7-F-O
Ideally, my motherboard should support 32GB ECC RAM, dual intel NIC...
Well, to maximize throughput and not having the disks as a bottleneck, i'm putting the zfs caches on SSD's:
L2ARC is the reading cache, so this has to be bigger to deliver frequently requested files. (during the shares)
ZIL is the write cache, so this requires a small SSD. You could put both...
Hello there! My first post on [H]ardForum. :3
Introduction:
I am building myself a nas that will run on Nas4Free, using the ZFS filesystem.
This NAS will be used as a backup server, music/movies streamer and document sharer.
( Possibly also as my personal cloud. ) I am building this to be...