Recent content by matt0r

  1. M

    80x80x15mm fan suggestions

    i ended up ordering the 15mm silenx, replaced the stock fan on my evercool HPL-815EP with it and holy shit its SILENT running around 1200-1500rpm, which is probaby a good 1500 less than the stock fan was running(loudly) and its keeping the cpu cooler that stock fan must have been a piece of...
  2. M

    80x80x15mm fan suggestions

    i'd go for a 25mm but i don't think it will fit in the case. i had to squeeze it in there as it is now
  3. M

    Antec ISK 310-150

    just built a htpc with this case put a ASRock A75M-ITX with a AMD A8-3850 in it. what heatsinks are everyone using? (without having to make any mods) i bought an evercool hpl-815ep but its pretty noisy. i wanna order a new 80x15mm fan for it but i don't know if that would help or should i just...
  4. M

    80x80x15mm fan suggestions

    so i just put together a mini-itx htpc with an amd A8-3850 i used an evercool HPL-815EP, but the fan on it is kind of loud. i'm trying to find something quiet that will still move enough air and will fit in the tiny case. i was looking at a SilenX iXtrema Pro 80mm fan, but is that going to move...
  5. M

    80x80x15mm fan suggestions

    so i just put together a mini-itx htpc with an amd A8-3850 i used an evercool HPL-815EP, but the fan on it is kind of loud. i'm trying to find something quiet that will still move enough air and will fit in the tiny case. i was looking at a SilenX iXtrema Pro 80mm fan, but is that going to move...
  6. M

    80x80x15mm fan suggestions

    so i just put together a mini-itx htpc with an amd A8-3850 i used an evercool HPL-815EP, but the fan on it is kind of loud. i'm trying to find something quiet that will still move enough air and will fit in the tiny case. i was looking at a SilenX iXtrema Pro 80mm fan, but is that going to move...
  7. M

    videocard reccomendation

    this is it http://www.newegg.com/Product/Product.aspx?Item=N82E16814143149 the image says gtx+ but the description just says gtx, hmmm but no definitely not tied to nvidia. like i said ive been out of the loop for a while, i guess i jusut assummed nvidia still had the "lead" because the last...
  8. M

    videocard reccomendation

    also, the 8800gts is a g92 512mb, not the old g80
  9. M

    videocard reccomendation

    what card is gonna give me the best bang for my buck if i have a 200 dollar budget? ive never heard of zotak, they have a 9800gtx for 199 on newegg there's also a bfg 9800gtx for 209 i trust bfg, not sure about zotak. its worth the extra 10 bucks i think should i not be looking at 9series...
  10. M

    mobo for q6600

    i haven't really been following anything since i got my core2 at launch with a ds3 im building a rig for my brother based around a q6600 but i havent been keeping up with this stuff, whats a good overclockable mobo for under 200 now?
  11. M

    Trouble with 1st time build

    speedstep should drop the multi to 6x though, not 7 so it might just be set wrong in the bios
  12. M

    wierd problem

    sorry guys i realized afterwards i posted it here and not general but i got it i noticed after i took out the videocard that 2 of the pins on the bottom were missing rma time
  13. M

    new system problem. help?

    just took the card fout again and i noticed one of the pins on the videocard is like chipped off or partially missing thanks for the response
  14. M

    new system problem. help?

    i know this picture sucks, its from a camera phone i just finished putting together a new system e6300 asus p5b an evga 7600gt it posts but then theres wierd artifacting i guess all over the screen. it works fine i can go into the bios and stuff but the screen is covered in that wierd...
  15. M

    wierd problem

    got it
Back
Top