Recent content by m3ta1head

  1. m3ta1head

    Loving this 2600X!

    Nice work man! I've been unable to push to 3600 - is that result with 2 or 4 dimms?
  2. m3ta1head

    Loving this 2600X!

    .725v
  3. m3ta1head

    Loving this 2600X!

    I actually just double checked and I've got my offset set at -.075v, not -.05v. The only stability issues I was having previously were due to memory - it took me a good couple of weeks to dial in stable tight timings, lots of trial and error and endless memtest runs. And yeah, getting above...
  4. m3ta1head

    Loving this 2600X!

    You might have to back off the negative offset a little. I'm running -.05v currently (edit: just double checked, I'm actually at -.075v) because I was also getting instability with more negative values. I'm using 2x8GB TridentZ F4-3200C14D, which is one of the better binned b-die kits...
  5. m3ta1head

    Loving this 2600X!

    Nice work! I'm loving my 2600X as well - I originally purchased it to tide me over until Zen2 drops next year, but it's more than capable of holding it's own. I've got mine close to 8700K MCT levels.
  6. m3ta1head

    *RARE* BFG nVIDIA GeForce FX 5800 Ultra AGP 8X 128MB DDR

    This is so weird. Why are people paying $600-2000 for the biggest piece of shit card nvidia ever made??
  7. m3ta1head

    Best speakers for $1000?

    Very nice. Is that a Crown power amp? I've lusted after the LS50s for a while, definitely on the short list if a good deal ever comes along. Here's my desktop setup: https://imgur.com/a/zrc7k
  8. m3ta1head

    Southern NH/Northern Mass Ryzen Owners Need Help

    Get in touch with AMD and they'll send you out a boot kit with an older APU for free. https://support.amd.com/en-us/kb-articles/Pages/2Gen-Ryzen-AM4-System-Bootup.aspx
  9. m3ta1head

    Post your Ryzen memory speeds!

    I tried going down to 236 and was getting hard crashes. Haven't tried anything between that and 256 - worth a shot though, I'll try dropping down and seeing if it makes a difference. Formula.350 I am now running a 3200C14 kit, and your assumption was correct regarding the discrepancy in...
  10. m3ta1head

    R7 2700/2700x on B350?

    I currently have the single fan on the ceiling of my case set up as an intake to get airflow over the VRMs, but what I'm planning to do is ordering this Noctua slim 92mm fan and mounting it with zipties to blow over the VRM sinks. Even a modest amount of airflow directly over the VRMs brings...
  11. m3ta1head

    R7 2700/2700x on B350?

    Sadly there is a serious lack of good mATX AM4 boards. You've already picked out what is probably the best one, the TUF B350M. The 4+2 phase VRM will just about handle a stock 2700/2700x, but I wouldn't try to run an all core OC like Nightfire mentioned. Maybe even apply a vcore/vsoc...
  12. m3ta1head

    Post your Ryzen memory speeds!

    I used 1.48vdimm and 1.075vsoc. Can probably come down on vdimm, going to take some further tweaking. Still testing for full stability at the current settings.
  13. m3ta1head

    Post your Ryzen memory speeds!

    Managed to break the 60ns barrier.
  14. m3ta1head

    R5 2600X overclocked to 4.32GHz on Strix B350-F

    So I ended up picking up some different memory - got a kit of TridentZ 3200C14 (basically slightly better binned b-die). I'm getting good results with the new memory - I'm able to run tighter timings on these at 3200/3400mhz compared to the C15 kit I had before. Goes to show how important dram...
  15. m3ta1head

    R5 2600X overclocked to 4.32GHz on Strix B350-F

    Build looks sweet! That Meshify is a real nice case - makes my Lian Li look pretty outdated in comparison. Those are great hardware picks all around too - that TridentZ kit should easily be able to push up to 3466C14, and possibly even higher. So with these CPUs there's basically two ways to...
Top