Recent content by KonroKing

I am using a old func1030 with a razer lachesis but the right button sometimes doesnt click or it gets stuck.. is there anyway around that? i might need a new mousesoon

I have a parts list I can post up but it's basiclly a Swiftec Res going to a BiP 2x120 rad (yate loons) with a e6600 400x8 = 3.2@1.344v idle/1.368v load connected to a AquaExtreme Mp05 block with a swiftec mcw60 on the asus 7950gt 30c idle. are my temps to high? i get diff results with Real temp...

It doesnt have to be that one exact right? I just want to upgrade to a 260+ not a 88xx and I am not going to redo my loop so if this NON-R Swiftech block wont work I dont upgrade

Pic works fine but it's a Swiftech MCW60 Waterblock not the newer 60-R or 60-r2

I have attached a reciept of my items I had a few questions aswell I am soon to be getting a 260/2xx card and have read about the GT200 adapter plate for my waterblock but I have the discontinued version and the ones out now are the -R / -Rv2 while they look the same I am not sure if it will work.

I have been wondering if I was to take apart my watercooling loop and refilled it if I would see any temp drops... Rig has been running for about 3 years now and I have not done anything to the watercooling setup since I purchased it...

Raise the MCH voltage +.1 (to start) Raise the FSB voltage to the 1st increment available Start off at 350x9 - make sure your memory multiplier is set to 2.0 - this will underclock your memory for the moment. Memory Performance Enhance to "Normal" Boot into a memtest86+ CD so you...

I have a e6600 with a a Gigabyte GA-965P-DQ6 (revision 1) running Corsair TwinX-6400c4 The ram is rated at 2.1v with timings of 4-4-4-12, the cpu stock vcore is 1.325 (bios @1.45v) and the motherboard was left alone.. I have not adjusted the MCH or FSB volts. I know that running stock vcore i...

I am running a Gigabyte DQ6 with a E6000 watercooled with XMS2-6400 (4-4-4-12) memory. The vcore was left at default and the fsb bumped to 333 I am running at 3ghz but would like some help i know this system posts at 400x9 = 3.6 but crashs due to me not having the proper settings in bios...