Recent content by jinx083464

I've read around and some people can get it working on bluetooth, some cannot. If you are one of the ones who can get it working over bluetooth can you post your OS and maybe give a link or description of your bluetooth adapter? All I can find out about my USB bluetooth dongle is that the...

I was using my multimeter just yesterday. I don't know why I didn't think of using it because I've been told before that the software readouts are unreliable. I got 11.7V on my multimeter, though it was not so fun getting a reading due to my submerged PC...

BIOS shows me at 11.4 volts. With Windows running, CPUID shows me at 8.184V while idle, as well as under a benchmark. Been running at this low voltage for months with no noticeable issues, should I have to worry about this? Side note, the cause is probably because I'm running SLI 560...

Tried several old drivers. finally got one to operate properly when recovering from sleep mode. It was the 8.753.0.0 driver. As for hitting the power button to wake my computer, the keyboard and mouse do work to wake it, but I never seem to remember this as I'm sitting down at my computer and...

I now have a listing for hybrid sleep, that was not there before, I wonder if it was from switching my BIOS from S1 to S3. Tried it on and off, both react the same. I did try removing the GPU and that worked. I could put the computer to sleep and recover from it just fine. My bios is...

SP1 and following updates are complete, unfortunately it did not resolve the issue. With all my tweaking and attempts, I have noticed on a few occasions when trying to recover from sleep mode, that the screen will come back, and a message pops up from my task bar saying my AMD display driver...

Fresh install. Have drives set to AHCI to make use of my SSDs (neither are the boot drive, odd I know) In the power options advanced settings under the sleep section, I don't have a listing for hybrid sleep, only sleep, hibernate, and 'allow wake timers' Thought windows was up to date but...

Used to use sleep mode all the time, recently upgraded my CPU from an e8400 to i5 2500, ram, and Mobo to a gigabyte H67A-UD3H-B3. Now my computer won't recover properly from sleep mode. Some more details -Video driver up to date -Bios up to date -Tried both bios settings for ACPI suspend...

I didn't have a multimeter lying around so I went out and purchased a cheap one. Turns out that it wont work on the PSU because the psu puts out too much current for the multimeter I got to handle. I ended up buying a new motherboard, and unfortunately It did not solve the problem, so I...

motherboard: Asus P5N-D CPU: intel core 2 duo E8400 GPU: KFA2 9600GT running in SLI RAM: 2 X 2 gig sticks of ddr800 PSU: Ultra X3 1000w Ryan_975 says the USB runs off the 5v rail as well, I have not had an issue with my USB devices. The repeating black screen seems to have no...

My 1000w ultra X3 PSU was reading at 4.1volts on the 5V line, the 12v and 3.3v were not too far off though. I only realized this after my computer couldn't access my hard drives any more. I thought the problem was with the hard drives at first until I swapped them into other computers and they...