Recent content by FelixRussia

  1. F

    NCASE M1 picture and build general log

    Debated on posting this to the main thread, and figured this might be better. It's not a V5 (it's a V3), and it's not amaze-balls powerful, but it's mine and I like it, and it does what I need it to and then some. Here's my Craigslist find (just the case) all dressed up, but first some specs...
  2. F

    4690k 80c under load with Corsair H60

    Just from my experience with an Antec Kuhler 620, the 120mm closed loop coolers get up to temperature really fast under heavy load. Unless you have really high quality fans on the radiator, eventually the fan(s) just can't remove heat fast enough. Temps shouldn't be as extreme under casual...
  3. F

    connecting a bolt-on cpu watercooler to a gpu

    NZXT just released a bracket that's compatible with a good majority of Asetek closed-loop water coolers. http://store.nzxt.com/NZXT-KRAKEN-G10-GPU-BRACKET-p/rl-krg10.htm
  4. F

    Halloween 2013

    Slender - The Arrival looked promising, I've been meaning to grab it at some point.
  5. F

    Recommend a gaming site for indie games

    I found Desura through the Indie Royale Bundles. It might relevant to your interests.
  6. F

    Sapphire 7950 OC boost

    I might be interested in on of the 7950s, do you have any feedback?
  7. F

    Would this setup be good for gaming?

    That's pretty much the bigger version of the laptop I have with the same APU and I sit and play Diablo 3 at low/medium settings and Borderlands 2 at medium settings for a few hours at a time and its pretty stable. So long as it can breathe well it should stay pretty stable under load.
  8. F

    When to upgrade?

    If you can't fight the itch, just get a mini-ITX board and case that can support most of what you're running already. You can run your current setup (minus the motherboard obviously) inside of a Prodigy. It's not a complete upgrade, but at least it would be a smaller package.
  9. F

    Question for BitFenix Prodigy owners

    I've thought about doing it, and I'm pretty certain it would work with no modding (haven't checked to see if the screw holes would still match up), however, flipping the panels around would move the vented panel away from your video card. If you're water cooling, its not much of an issue, but if...
  10. F

    custom cooling a MITX prodigy, Complete noob to cooling.

    The Linus Tech Tips guy did a pretty comprehensive Prodigy water cooled build, obviously a little different from what you're doing, but still gives you a pretty good idea of what you can squeeze into the Prodigy: http://youtu.be/_lNTEO4-yHs
  11. F

    Bitfenix Prodigy Build Help Please

    If you're not going to overclock, there's not much point in getting the K model or the Z77 board, or you could and then at least you'd have the ability if you ever decided you wanted to. I'm running a Corsair 430w in my Prodigy, and it'll run a 660Ti just fine, so I would assume you could get...
  12. F

    Questions on a potential first Loop

    Excellent! I'm not sure how this didn't come up in my searching. Definitely something I needed to see!
  13. F

    Questions on a potential first Loop

    This is more of what I'm talking about: http://www.frozencpu.com/products/18789/ex-rad-487/Alphacool_NexXxoS_XT45_Full_Copper_Dual_180mm_Radiator.html?tl=g30c95s1551#blank A radiator that supports two 180mm cooling fans, which come stock in the Raven RV02.
  14. F

    Questions on a potential first Loop

    In terms of reusability, I'm not too worried about that since I just got the case and have no plans of upgrading my case again anytime soon. I do understand that the 360mm radiators are more the standard, but I figured that the Air Penetrator fans that the case came with would work better with...
  15. F

    Questions on a potential first Loop

    Hey Everyone, I'm considering building my first water cooling loop and I've got what should be simple questions, but would like more experienced answers on. I just recently rebuilt my machine in a Silverstone Raven RV02, and one of my biggest questions I've got at the moment is would I be...
Back
Top