• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by egandt

  1. E

    W10: 680GTX upgraded from 355.82 to 355.98, No HDMI

    Windows 10 x64: Updated Nvidia drivers to 355.98 on my 680GTX, completely lost any HDMI output, tested 3 TV's nothing, tried clean re-install of 355.98 still nothing, force detection nothing. Uninstalled Nvidia Driver and poof its back. Preformed a clean install of 355.82 rebooted and again...
  2. E

    Nvidia 780 and spaning over 3 monitors, of 4 will not let me chose

    Finally got the DP to DVI cable and installed it today, again no success. It will not allow the 3 monitors I want to be set as a group, no matter how they are attached. As far as I can tell this is a driver issue, since everything states this is supported and should operate correctly, have to...
  3. E

    Nvidia 780 and spaning over 3 monitors, of 4 will not let me chose

    Amazingly DP to DVI is maybe the only adapter I do not have, never thought I'd want to make that conversion :)
  4. E

    Nvidia 780 and spaning over 3 monitors, of 4 will not let me chose

    The more I play with it the more I think it is a driver issue, no matter what else, if the 2405 is plugged in (HDMI using a DVI, or either DVI port), then it is always forced to be part of the Surround Configuration, any of the other monitors can be present or not depending upon what input is...
  5. E

    Nvidia 780 and spaning over 3 monitors, of 4 will not let me chose

    It will only allow the HDMI, DVI and Display Port to be used (which would be fine if I could select which DVI), but the issue is the DVI selected is always the wrong monitor (if I unplug one then it select the correct set, but as soon as I plug it back it poof wrong one again), no matter which...
  6. E

    Nvidia 780 and spaning over 3 monitors, of 4 will not let me chose

    I have 4 monitors (1920x1200), I want to span over 3 of the four. Since I have 4 I'm using them as follows: 4 DVI-1 3 2 1 HDMI Display Port DVI-2 All are set to the...
  7. E

    Post Your Workstations 2013

    Ihave 4 of these: 3 Way Adjustable Tilting Wall Mount Bracket for LCD LED (Max 33Lbs, 10~25inch) Not the best mounts of all times, but for the price hard to match. They do adjust (by 3.5 inches), which was enough to get everything squared away, so long as you plan ahead.
  8. E

    Post Your Workstations 2013

    First the specs [Wish Intel would release an 8 core processor which could be overclocked]: Intel 980x 4.2GHZ (Water Cooled) AMD MSI 6970HD 512G Vector 150GB WD Raptor (boot recovery) 5.4Gb Raid6 3Ware 9690SA RAID controller 4 24" monitors - 2 Dell U2413 - 1 Dell 204FWP - 1 HP LP2475w...
  9. E

    Moved from AMD to Nvidia under Windows 8, Failure!, Remembered why I dislike Nvidia

    Wish I could, but I need the CUDa processing, so Nvidia it is. Anyways here how I fixed it. As I said both cards (Nvidia and AMD) work at the same time, restored then booted up with the Nvidia and AMD present, allowed both drivers to be installed, switched outputs to Nvidia, rebooted came...
  10. E

    Moved from AMD to Nvidia under Windows 8, Failure!, Remembered why I dislike Nvidia

    First off I use to use Nvidia all the time, then I moved to ATI and followed them to AMD, while not always the fastest I always had good luck with them, now I found I needed CDUA so I bought an Nvidia 680 to replace my aging AMD 5750 (its over kill, but was a good price). Thus I: 1. Uninstalled...
  11. E

    Asus Rampage 3 and Windows 7 x64 SP1 hanging constantly, ready to throw in the towel

    I have an ASUS Rampage III with an x980 happens at stock. I'm booting off a Vertex 3 240GB, with a secondary Gskill 120GB. Now the Gskill was the old boot drive and I've had this system for a full year without too many issues (even OC'ed), but lately I've had it. Windows 7 boots and runs like...
  12. E

    120GB GSKILL SSD failing on resume

    Moved to using Hibernate and that seems to have resolved the issue. ERIC
  13. E

    120GB GSKILL SSD failing on resume

    As I said its not much faster using iometer it about 5% so nothing to write home about, but every little bit helps, still not something I'll miss. I assume you mean turn off "Hard drive after", which I have set to 0 (never) PCI Link Sate Power Management (off) Agreed: I have a wacom...
  14. E

    120GB GSKILL SSD failing on resume

    I've moved to the Intel, for now, I actually found the Marvell slightly faster, mostly I assume because it spread out the load some, but moving back to Intel does nothing for the immediate issue, which is the 120GB GSKILL SSD, this was the old boot drive on this system, before switching to the...
  15. E

    120GB GSKILL SSD failing on resume

    120GB GSKILL SSD failing out with message: An error was detected on device \Device\Harddisk0\DR0 during a paging operation. When this occurs I need to reboot, after rebooting it will work fine, but after the system has been running for a few hours, or I sleep and resume a few times, I will...
See more
Back
Top