Recent content by dinos22

I did a bit of testing recently with the recently revived GTX275 Lighting and am happy to report I finally clinched the single W.R. after another bench session :) The P67X-UD3R-B3 is a little cracker of a board. Z68 gear is around the corner and will now have the same "X" range (i.e. P67X)...

These rigs hit the ground running with you don't they hehehe :cool:

PLL Overvoltage and CPU PLL are two different options in the bios, first one still has to be enabled for max clocks and second one is interesting, some guys are reporting that they can also reduce vcore when they lower CPU PLL, others actually have to bump it up a touch, good to see it works for...

i am trying to tell you that not all CPUs will be like yours, 4.8 isnt where PLL helps all chips, some will need it enabled even at 4.6 is what i am saying to you, yours is clearly better than the bottom of the barrel CPUs heh :)

thats not true actually it starts from about 4.5Ghz and those chips will max out at 4.8/4.9 depending on cooling if you are stuck at windows logo thats your chip limit. i have a chip here which does 5.2 and no more and another one that does 4.9 and no more, if i try to boot at 5Ghz it just...

that makes sense, you could retest and mention this as it clearly clocks much higher i guess

Kyle have you actually installed all the apps through the CD that came with the board? EasyTune will not operate properly if the Intel Management Engine Interface driver is not loaded on the system. CPU PLL Overvoltage has to be set to Enabled to be able to overclock past at higher...

you are not using any performance, in fact that is the best configuration to use anyways as slots 2 and 4 with a 2 stick kit overclock a bit better anyways i run my setups with slots 2 & 4 http://www.youtube.com/watch?v=8ngyUrjuQ80

test the GPU in another system just to make sure it actually works

OK guys i got a few bios updates for UD4/5/7 which should sort this S3 multi sleep mode give it a crack i tested UD7 and it works fine now, just enable S3 in bios http://filefactory.com/file/b5167da/n/Desktop.zip

i tested UD7 just now with F7a with a combination of different OCs and it doesn't remember the multiplier after coming out of S3, I've reported it to PM to sort out. We'll fix it up :)

Nice setup there man

the board is really good NB speeds past 4400MHz stable :) pretty good RAM performance :)

cheers fellas these CPUs are extremely hot for decent overclocks you will have to get a proper watercooling setup i feel :)

added an update