Recent content by DellCA

It sounds like the LCD cable is not properly connected to the motherboard. The service manual has instructions for how to remove and replace the display for the Inspiron 1100. If it is a loose connection all you should have to do is open up the system and reseat the motherboard end of the LCD...

cjv998 I am not sure if you have had a chance to read my message to you, but another option to get the OS disk is to fill the form out on this page: http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form?c=us&l=en&s=gen&redirect=1 Please let me know if you have...

ChronoReverse I believe we are on the same page with this. What I meant in saying "on 3 GB only 2 GB will be in Dual Channel" is that the remaining memory will be in single channel. The Intel link also explains this. Sorry if my last posted added confusion. I basically just wanted to point out...

mwarps this appears to be a typo as it should be 512 MB instead of 256 MB. The only thing to be aware of about Flex Mode is that only some of the memory will be in Dual channel. The BIOS will register it in Dual channel, but on 1.5 GB only 1 GB will be in Dual Channel and on 3 GB only 2 GB will...

I am pretty sure this was already answered by Tekara, but the systems that are being sold as having 3 GB of memory in Dual Channel are using "Flex Mode". This allows the systems to have 3 GB (2 GB + 1 GB) or 1.5 GB (1 GB + 512 MB) and still be in Dual Channel. As for the notebooks mentioned here...

Thank you for the suggestion. I have sent a PM to Kyle.

The team Richard and I are on consists of 11 people. So far both Richard and I have made posts on this site, however our other team members can use the same account to make posts as well. We basically would rather be viewed as a team than an individual. Please let me know if you have any further...

My name is Brad and I work at Dell headquarters in Round Rock, TX. Usually when calling in to Dell as long as you can verify the original contact information you should be able to get the monitor exchanged. This of course is if you are within warranty, and after troubleshooting. I have...

My name is Brad and I work at Dell headquarters in Round Rock, TX. It looks like you have already received the answer to your question, but the 2407 does have HDCP over DVI. Just a quick question, what are you going to use that is HDCP? Brad Dell Customer Advocate

Hello, My name is Richard; I am from Dell's Online Community Outreach group here in Round Rock, Texas. If you go this...

Hello, My name is Richard; I am part of Dell's Online Community Outreach group here in Round Rock, Texas. You would have to match the display resolution of the displays. It will take a few tries to tweak the final resolution until the board disappears. If you are still having issues...

fewproud: I’m at Dell Headquarters in Austin, Texas and I just came across this thread. It looks like you have a few options. I would see if restoring it to an earlier date works and if not I would do a complete format reinstall whether you're upgrading to Vista or not. You'll need to make...

Hello, My name is Richard; I am part of Dell's Online Community Outreach group. If you are having issues with you DVD burner may want to check and see if there is a firmware update. You can locate firmware at this address...

keylion: I’m at Dell Headquarters in Austin, Texas and I just came across this. I'm sorry to hear that it seems to have arrived with a problem. What I would do is test it with another system just to make sure it's the display and if so, either call support or contact me and I'll have a new...

Hello, This is Richard from Dell again to inquire the status of your display issue. Is the issue still present or have you corrected it. If you are working on this, could you tell me the type of computer you are using? Did you obtain the video card from Dell? I do hope everything is...