• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by barry6743

  1. B

    MSI Neo2 nF3 Platinum and Corsair pc4400

    This particular combination of CMX 512-4400C25 (x2) doesn't seem to OC well at all. I could not get near 230x11 and be somewhat stable. I finally tried some older OCZ PC4200 EL (2X256) and finally was able to reach 238x11 and no stability problems. I've tried lowering the multi to 10 to see if I...
  2. B

    The Official NForce3 6800 Problem thread

    I have found in this MSI Neo2 nF3 Platinum board that there is no provision for changing the PCI Latency which is required (Latency must be set at 128, says so in the manual). There are people writing Beta BIOS and someone needs to address this issue.
  3. B

    MSI Neo2 nF3 Platinum

    Has anyone gotten any really good results OC'ing the MSI Neo2 nF3 Platinum motherboard? I currently have an Abit AV8 that I run the FSB/HTT over 260MHz (with water cooling and Vcore of 1.725v) with a +3500 Venice processor and in the reviews I have found for the Neo2 they topped out at 220MHz...
  4. B

    Where to buy Swiftech Cooler brackets?

    Try here.http://www.frozencpu.com/cpu-swi-14.html They have a good supply of Swiftech stuff for air and water cooling.
  5. B

    Athlon 64 water cooling

    I don't have a digital camera but I'll see what I can find. The Antec Sonata case is a short ATX case (it has only 3 x 5.25" external bays). Link here-http://www.newegg.com/Product/Product.asp?Item=N82E16811129127 They have several good pictures available. One of the big selling points for me...
  6. B

    Blocks that will fit Socket 462 and 939?

    I use a Swiftech MCW-6000A waterblock on my Athlon 64 S/939 processor and according ot the thermal paste left on the waterblock when removed there is coverage over the entire processor. BTW my rig runs at 20C Idle and 38C SiSoft Burn-in test. I use a Swiftech MCP-350 to circulate between the...
  7. B

    Athlon 64 water cooling

    My $0.02 worth. My machine runs at 22C Idle and 35C Loaded. All cooling components fit inside the case I have (one of the reasons I bought it). As well as the 120mm exaust fan on the radiator there is a 120mm intake fan mounted behind the 3.5" Drive bays. Both are low speed/noise units. I needed...
See more
Back
Top